BIG DAISHOWA Product Guide Vol 3

MILLING CHUCKS

NEW Hi-POWER MILLING CHUCK

R

Clamping Range: ø.500"-1.500" (12-42mm) For heavy-duty end milling.

MAX 30,000 RPM

Clamping Range: ø.500"-1.500" (12-50mm)

The thick wall body and high gripping force ensures high rigidity and stable performance. Fine and narrow slits in the body make the clamping part deform properly to ensure even and strong gripping force and stable runout. Now available in BIG-PLUS as standard. See PJC collets on pg. 11 for reduction and coolant delivery options.

For heavy-duty end milling. Complete contact of nut and body achieves high rigidity, close to that of an integral tool to ensure heavy cutting without chatter. Notch-free nut makes high speeds possible.

Conventional Milling Chucks

CONTACT

Thin wall

Powerful Clamping for Heavy Cutting

HMCJ TYPE Clamping Range: Beginning at ø.500" (ø12mm)

Released

Tightened

Single roller

Uneven elastic deformation

10

Powerful Clamping Force Deflection test to compare with other manufacturer’s milling chuck proves that the MEGA DOUBLE POWER CHUCK has achieved 1.4 times higher rigidity.

Decreased runout accuracy and insufficient gripping force.

No escape route for oil film which causes processing failure. Remaining oil film reduces gripping power and may cause slip.

15 Stiffness (N/m)

0

5

10

1.4

HMC12J

MGN13

MGN16

BBT40-MEGA20D-75

HMC

1.0

Other Manufacturer’s 40 Taper Milling Shuck

Thick wall

ø1.260

.5mm

ø1.387

ø1.654

Secure Coolant Supply Designed to delivered the most effective coolant supply. Collets available for reduction and more directed coolant delivery. See pg. 11. Coolant is reliably directed to cutting tool periphery from chuck nose.

Jet Through

Even elastic deformation

Tandem roller unit

Jet Through

Stable runout accuracy and high gripping force.

Type DS

Also available in ø32mm straight shank type.

The narrow slit maintains an escape route for any oil film.

Powered by