TURNING TOOLS
DUAL-CONTACT FOR MTC The first modular tooling system for turning applications on MTCs (Mill-Turn Centers). This system offers improved efficiency, heat treatment, material selection, and optimal tool lengths. Replacing broken inserts is now a hassle-free and cost-effective process.
R
COOLANT
SPINDLE SYSTEM DUAL CONTACT
THROUGH
RIGHT ANGLE STYLE TYPE F
45 º TILT STYLE TYPE S
Very Precise Locating Pilot
Locking Screw 2x
Orientation Pin
90º
45º
Face-To-Face Clamping
Clamp Bolts
Simple and Positive Clamping Type F uses two clamping bolts that press the cartridge onto the basic holder. The torque is transmitted by an interlocking drive slot.
Secure and Rigid Clamping Type S Cartridges are mounted in the basic holder using a precision-ground pilot and two opposing 15º tapered radial screws. A slight socket offset ensures high face-to-face clamping force. A locating pin ensures precise positioning and torque transfer.
Face Clamping
16
Safe and Easy Clamping of Inserts The double-clamping system simultaneously pushes an insert downward and draws it into the contact faces to achieve secure and rigid clamping.
Clamp Screw
Clamp Piece
Insert
Spring
Carbide Shim
BCV40/50 BBT40/50
C5/C6/C8
HSK-T50/63/100
Shim Screw
BCV40/50 BBT40/50
C5/C6/C8
HSK-T63/100
15 Cartridges For 45 º Tilt Style Type S
24 Cartridges For 90 º Right Angle Style Type F
This MTC turning tool program offers cartridges for right-hand, left-hand, and neutral use, as well as integral models. Additionally, square tool holders and boring bar holders are available.
This MTC turning tool program offers cartridges for right-hand and left-hand. Additionally, square tool holders and boring bar holders are available.
Powered by FlippingBook