ANTI-VIBRATION HOLDERS
SMART DAMPER (PAT. 9027720) Unique Dynamic Damper Eliminates Chatter
BCV BBT
HSK CKB
Our innovative, patented damper system uniquely combines counter-damping and friction damping in one integrated solution. The counterweight design maximizes frictional damper, effectively eliminating chatter and significantly enhancing machining precision.
FACE MILL (ARBOR TYPE WITH BUILT-IN DAMPER) For Face Milling with Long Projection Length Pilot: ø22mm, ø27mm & ø32mm / ø.750" & ø1.000"
Fine Boring of Ductile Cast Iron (FCD500)
Cutting Conditions Machine: HMC (BBT50) BIG-PLUS Boring Dia: ø2.677"
Cutting Speed (SFM)
Result
R
Tool Holder
500
80
165 325
SPINDLE SYSTEM DUAL CONTACT
Outperforms competitor’s holder by 6X higher productivity. Superior surface finish and better tool life due to the increased cutting speed.
Depth of Hole: 16" (L/D=6:1) Insert Nose Radius: R .016"
Competitor (w/o damping system)
Feed Rate: .008"/rev. Depth of Cut: .012"/ø
Built-in damping mechanism SMART DAMPER
Basic Holder (BBT50/BCV50/HSK-A100)
Damper Head
= Vibration
= Acceptable
= Excellent Surface Finish
18
CK BORING SERIES (WITH BUILT-IN DAMPER) High-Efficiency Deep Hole Finish Boring Is Available
R
SPINDLE SYSTEM DUAL CONTACT
INTERNAL TURNING TOOL (BORING BAR WITH BUILT-IN DAMPER) For Face Milling with Long Projection Length
Cartridges can be exchanged according to the application.
Eliminates Chatter in Internal Turning The heaviest damper in the SMART DAMPER series instantly absorbs chatter in both rough and finish operations.
EWN BORING HEAD TYPE The EWN Boring Head functions are maintained, featuring integrated damper.
SW BORING HEAD TYPE PAT. Damper located closer to the cutting edge provides greater damping effect.
CK SHANK TYPE PAT. A damper is built into the CK Shank. L/D = 6x
CK EXTENSION TYPE PAT. Just combine it with your standard CK Boring Head/ Shank to achieve damping countermeasures.
Powered by FlippingBook