BIG DAISHOWA High Performance Tooling Solutions Vol 2

ANGLE HEADS

AGU30 TYPE CLAMPING RANGE: Ø.098"-.787" For Angular Operations

L

L 2

L 1

G G

Max F 2

Ø3.819

MAX 6,000 RPM

M .197 Pin Compression Fixed Length A

Fig. 1

L

L 2 Max F 2

L 1

G G

ANGLE ADJUSTMENT BY ALIGNING DIVISIONS Spindle angle is easily adjustable from 0º to 30º using the scale indication on the body.

Ø4.921

MAX 4,000 RPM

M

.236 Collar Compression (#50 Only)

Fixed Length A .118 Pin Compression

Fig. 2

R

SPINDLE SYSTEM DUAL CONTACT

Catalog Number

Max RPM

Weight (lbs.)

Fig.

Ød

ØE G L

L 1

L 2

M P Q F 1

F 2

Collet

BBT40-AGU30/NBS13-240 BBT50-AGU30/NBS20-295

.098-.512 .098-.787

1 2

1.378 1.142 9.45 5.32 4.12 5.79 1.34 1.18 2.07 .55 NBC13- † 1.811 1.437 11.61 6.50 5.12 6.38 1.77 1.54 2.56 .67 NBC20- †

6,000 15.3 4,000 35.8

• Nut and wrench are included, collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • Automatic tool change may not be available depending on machine tool models • When supplied through the stop block, coolant can be ejected from the housing

A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle. ! CAUTION

ACCESSORIES

COLLET PG. 362

WRENCH PG. 374

STOP BLOCK PG. 409

STOP BLOCK PG. 409

SETTING DISC (INCLUDED) For the precise adjustment of spindle angle or direction.

Clamp the Setting Disc Into the Angled Spindle

Check the Cutter Alignment and the Setting Angle

165

Powered by