BIG DAISHOWA High Performance Tooling Solutions Vol 2

MILLING CHUCK

Min Clamping Length

Weight (lbs.)

Catalog Number

L 2

H

Wrench

Fig.

ød

øD

L

L 1

E

E 1

HSK-A125-HMC.750J-4 HSK-A125-HMC1.000J-5 HSK-A125-HMC1.250J-5 HSK-A125-HMC1.500J-5 HSK-A125-HMC2.000J-6

.750

2.36 2.44 3.15 3.90 4.13

4.09

2.15 2.27 2.59 3.31 4.94

2.95

2.64

2.28 2.64 2.83 2.87 3.50

1.97 2.20 2.36

12.1 12.3 15.0

FK58-62

1.000 1.250 1.500 2.000

2

3.95

5.09

3.63

FK80-90

2.48 FK92-100 18.0 3.50 FK110-115 20.5

1

6.09

4.54

ACCESSORIES

• Wrench and axial adjusting screw must be ordered separately • When using center through coolant: - Set screw with sealing compound applied (standard accessory) should be used to plug an air bleed hole - Oil hole type should be chosen when straight collet is required • “H” dimension is the Max tool shank length that can be inserted into the holder • Optional adjusting screw can be used with models marked ™ • Straight collet model C32- †† can only be used with models marked ‹ • M8 hex screw is required with models marked z please contact us if using for center through applications

PERFECT SEAL/ JET COLLET PG. 385

COLLET PG. 388

WRENCH PG. 391

SCREW PG. 414

• M12 hex screw is required with models marked „ • Through tool coolant for HSK-A125 is Jet type delivery

NEW Hi-POWER MILLING CHUCK CLAMPING RANGE: Ø12mm

COOLANT

JET THROUGH

HMC12J

MGN13

MGN16

A slim yet highly rigid milling chuck with Ø32 outer diameter nut for reduced interference.

THROUGH

Ø1.260

Ø1.387

Ø1.654

L

1.69 (Shortest Grip Depth) 2.56 (Max Insertion Depth)

Coolant Pipe (Optional)

L 1

Manual Clamping Hole

Catalog Number

Weight (lbs.)

L

L 1

Wrench

3.54 4.72

2.08 2.75

2.4 3.1

HSK-A63-HMC12J-90 HSK-A63-HMC12J-120 z

FK31-33

• Wrench must be ordered separately • M8 hex screw is required with models marked z please contact us if using for center through applications

193

Powered by