TAP HOLDERS
MEGA SYNCHRO TAPPING HOLDER TAPPING RANGE: No.0-No.6 (M1-M3)
BODY
MICRO COLLET
TAP
Manual Clamping Hole
3.94
Micro Collet NBC4S-
2.52
.87
Coolant Pipe (Optional)
.47
Catalog Number
Weight (lbs.)
HSK-A63-MGT3-100
2.2
• Nut is included; collet and wrench must be ordered separately • When attaching or detaching the tap, a commercially available flat wrench (12mm width) is also required • Not capable of supplying coolant through the holder body
Cannot be used with machining center without synchronized tapping function. ! CAUTION
ACCESSORIES
COLLET PG. 358
MEGA NUT PG. 360
MEGA WRENCH PG. 392
MEGA SYNCHRO TAPPING HOLDER TAPPING RANGE: AU13/16-AU1-3/8 (M20-M36)
COOLANT
BODY
TAP HOLDER
TAP
THROUGH
L
Coolant Pipe (Optional)
HSK No.
Catalog Number
Tapping Range d (Inch) AU13/16-AU1-3/8 AP3/8-AP1 AU13/16-AU1-3/8 AP3/8-AP1
Tapping Range d (Metric)
Weight (lbs.)
ØD
L
HSK-A100-MGT36-165
M20-M36
3.70
6.50
18.0
M20-M36
HSK-A125-MGT36-170
3.70
6.69
22.4
• MGT Set Screw and adjust screw are included; coolant pipe, tap holder must be ordered separately
Cannot be used with machining center without synchronized tapping function. ! CAUTION
ACCESSORIES
TAP HOLDER PG. 406
SYNCHRO ADJUSTER PG. 407
O-RING PG. 407
SCREW PG. 407
207
Powered by FlippingBook