ANGLE HEADS
AG90 NBS TYPE CLAMPING RANGE: Ø.010"-.787"
MAX 6,000 RPM
K
L
L 1
L 2
ØE Ød
G G
Coolant Pipe (Optional)
Ø3.819
Fixed Length A .197 Pin Compression
R18
M
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØE
G
K
L
L 1
L 2
M P
Q ØF
Collet
HSK-A63-AG90/NBS6-185 HSK-A63-AG90/NBS6-215 HSK-A63-AG90/NBS6-245 HSK-A63-AG90/NBS6-275 HSK-A63-AG90/NBS10-185 HSK-A63-AG90/NBS10-215 HSK-A63-AG90/NBS10-245 HSK-A63-AG90/NBS13-185 HSK-A63-AG90/NBS13-215 HSK-A63-AG90/NBS13-245 HSK-A63-AG90/NBS20-200 HSK-A63-AG90/NBS20S-180S
7.28 8.46 9.65
2.17 3.03 3.35 4.21 4.53 5.39 5.71 6.57 2.17 3.03 3.35 4.21 4.53 5.39 2.17 3.03 3.35 4.21 4.53 5.39
13.0 13.5 13.9 14.3 13.9 14.8 15.4 14.1 15.0 15.7 16.5 17.4
.010-.236
.787 .827 .669
5.12
1.30 1.14 2.638 NBC6-
6,000
10.83
7.28 8.46 9.65 7.28 8.46 9.65
.059-.394
1.181 1.181 .984
5.12
1.77 1.69 3.583 NBC10-
6,000
.098-.472
1.378 1.220 1.102
5.12
2.05 1.77 3.976 NBC13-
6,000
1.378 7.87 5.12 2.76 1.299 7.09 5.00 2.09
.098-.787
1.811 1.378
3.62 2.56 2.44 5.197 NBC20-
3,000
• Nut and wrench are included; coolant pipe and collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY END MILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 362
WRENCH PG. 374
STOP BLOCK PG. 409
210
Powered by FlippingBook