ANGLE HEADS
AG90 NBS TYPE CLAMPING RANGE: Ø.010"-.787"
MAX 6,000 RPM
K
L
L 1
L 2
G G
ØE Ød
Coolant Pipe (Optional)
Ø3.819
R.827
M
.236 Collar Compression
Fixed Length A .118 Pin Compression
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØE
G
K
L
L 1
L 2
M P
Q ØF
Collet
HSK-A100-AG90/NBS6-225 HSK-A100-AG90/NBS6-255 HSK-A100-AG90/NBS6-285 HSK-A100-AG90/NBS6-315 HSK-A100-AG90/NBS10-225 HSK-A100-AG90/NBS10-255 HSK-A100-AG90/NBS10-285 HSK-A100-AG90/NBS13-225 HSK-A100-AG90/NBS13-255 HSK-A100-AG90/NBS13-285
8.86
2.17 3.23 3.35 4.41 4.53 5.59 5.71 6.77 2.17 3.23 3.35 4.41 4.53 5.59 2.17 3.23 3.35 4.41 4.53 5.59
26.0 26.5 27.3 26.9 27.8 28.4 27.1 28.0 28.6 29.5
10.04 11.22 12.40
.010-.236
.787 .827 .669
6.69
1.30 1.14 2.638 NBC6-
6,000
8.86
.059-.394
1.181 1.181 .984
10.04 11.22
6.69
1.77 1.69 3.583 NBC10-
6,000
8.86
.098-.512
1.378 1.220 1.102
10.04 11.22
6.69
2.05 1.77 3.976 NBC13-
6,000
HSK-A100-AG90/NBS20-240 .098-.787
1.811 1.378 1.378 9.45 6.69 2.76 3.82 2.44 2.44 5.197 NBC20-
3,000 30.4
• Nut and wrench are included; coolant pipe and collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY END MILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 362
WRENCH PG. 374
STOP BLOCK PG. 409
211
Powered by FlippingBook