BIG DAISHOWA High Performance Tooling Solutions Vol 2

COLLETS

MEGA ER25

MEGA ER32

Catalog Number

Clamping Range Ød

Catalog Number

Clamping Range Ød

Catalog Number

Clamping Range Ød

ERC32-11AA .413-.433 ERC32-11.5AA .433-.453 ERC32-12AA .453-.472 ERC32-12.5AA .472-.492 ERC32-13AA .492-.512 ERC32-13.5AA .512-.531 ERC32-14AA .531-.551 ERC32-14.5AA .551-.571 ERC32-15AA .571-.591 ERC32-15.5AA .591-.610 ERC32-16AA .610-.630 ERC32-16.5AA .630-.650 ERC32-17AA .650-.670 ERC32-17.5AA .670-.690 ERC32-18AA .690-.709 ERC32-18.5AA .709-.728 ERC32-19AA .728-.749 ERC32-19.5AA .750-.768 ERC32-20AA .768-.787

ERC25-3AA .108-.118 ERC25-3.25AA .118-.128 ERC25-3.5AA .128-.138 ERC25-3.75AA .138-.148 ERC25-4AA .148-.157 ERC25-4.25AA .157-.167 ERC25-4.5AA .167-.177 ERC25-4.75AA .177-.187 ERC25-5AA .187-.197 ERC25-5.25AA .197-.207 ERC25-5.5AA .207-.217 ERC25-5.75AA .217-.226 ERC25-6AA .217-.236 ERC25-6.5AA .236-.256 ERC25-7AA .256-.276 ERC25-7.5AA .276-.295 ERC25-8AA .295-.315 ERC25-8.5AA .315-.335 ERC25-9AA .335-.354 ERC25-9.5AA .354-.375 ERC25-10AA .376-.394 ERC25-10.5AA .394-.413 ERC25-11AA .413-.433 ERC25-11.5AA .433-.453 ERC25-12AA .453-.472 ERC25-12.5AA .472-.492 ERC25-13AA .492-.512 ERC25-13.5AA .512-.531 ERC25-14AA .531-.551 ERC25-14.5AA .551-.571 ERC25-15AA .571-.591 ERC25-15.5AA .591-.610 ERC25-16AA .610-.630

ERC32-3AA .108-.118 ERC32-3.25AA .118-.128 ERC32-3.5AA .128-.138 ERC32-3.75AA .138-.148 ERC32-4AA .148-.157 ERC32-4.25AA .157-.167 ERC32-4.5AA .167-.177 ERC32-4.75AA .177-.187 ERC32-5AA .187-.197 ERC32-5.25AA .197-.207 ERC32-5.5AA .207-.217 ERC32-5.75AA .217-.226 ERC32-6AA .217-.236 ERC32-6.5AA .236-.256 ERC32-7AA .256-.276 ERC32-7.5AA .276-.295 ERC32-8AA .295-.315 ERC32-8.5AA .315-.335 ERC32-9AA .335-.354 ERC32-9.5AA .354-.375 ERC32-10AA .376-.394 ERC32-10.5AA .394-.413

ØA=1.26 (32mm) B=1.58 (40mm)

ØA=.98 (25mm) B=1.34 (24mm)

• BIG’s ERC collets have a maximum clamping capacity of .020/Ø (.5mm/Ø) • To obtain the best runout accuracy and rigidity, ERC collets for smaller tools have a reduced clamping range • For best results, users should avoid clamping tools with shank diameters less than the recommended clamping range

Conventional DIN collets have a clamping range of 1mm/Ø. Never use ERC collets for more than .020/Ø (.5mm/Ø) below nominal size. To maintain the accuracy of the tool assembly, do not use collets and nuts manufactured by another company with the chuck body of BIG’s MEGA ER GRIP. We cannot guarantee the accuracy statement for our collets if they are assembled on the chuck body of another manufacturer. ! CAUTION

377

Powered by