SPERONI Tool Presetting & Management Vol. 2

ACCESSORIES

REDUCTION ADAPTER Automatic Integrated Clamping

Type

Catalog Number

Loss in Z

Outer Taper

Inner Taper

Adapter will simultaneously clamp to the tool as it is clamped to the spindle. The adapter has an integrated calibration notch with calibration values etched onto the side plate.

32.310.100 32.310.101 32.310.102 32.310.103 32.310.110 32.310.111 32.310.112 32.310.114 32.310.116 32.310.119 32.310.120 32.310.121 32.310.122

ISO 40 ISO 30 ISO 45 ISO 30

ISO 50

-35mm

ISO 40

• Requires automatic clamping system

HSK-40A/C HSK-50A/C HSK-63A/C HSK-80A/C HSK-80FM

-80mm

ISO 50

C3 C4 C5 C6

-80mm

SPERONI STEEP TAPER / HSK MANUAL CLAMPING REDUCTION ADAPTER

Type Outer Taper Inner Taper

Type Outer Taper Inner Taper

Catalog Number

Catalog Number

Integrated clamping system ensures secure and repetitive clamping. The design allows for tool holder clamping without having to remove the coolant tube. Supplied with a precision ground calibration notch with calibration values etched onto the side plate.

32.110.001 32.110.001.1 32.110.002 32.110.003 32.110.004 32.110.005 32.110.006 32.110.007 32.110.008 32.110.009

32.110.010 32.110.011 32.110.012 32.110.013 32.110.014 32.110.019 32.110.020 32.110.021 32.110.022

HSK-32A/C

HSK-50F

HSK-32E HSK-32F

HSK-63A/C HSK-63B/D

HSK-40A/C HSK-40B/D

HSK-63E HSK-63F

ISO 50

ISO 50

HSK-40E HSK-40F

HSK-100A/C HSK-100B/D

HSK-50A/C HSK-50B/D

HSK-100E HSK-100F

HSK-50E

• For pull stud ISO 50 32.110.031

SPERONI STEEP TAPER NO CLAMPING REDUCTION ADAPTERS

SPERONI STEEP TAPER / BIG CAPTO FRONT CLAMP ADAPTER With the adapter mounted on the presetter, tools can be mounted/demounted using an allen key.

Supplied with a precision ground calibration notch with calibration values etched onto the side plate. A full taper allows for more spindle contact. Drop-in design used for accurately measuring Z (length) and X (diameter and runout).

Type

Catalog Number

Outer Taper

Inner Taper

32.110.050 32.110.051 32.110.052 32.110.053 32.110.054

C3 C4 C5 C6 C8

Type Outer Taper Inner Taper

Catalog Number

BT50

32.310.094 32.310.095 32.310.096 32.310.097 32.310.098

ISO 25 ISO 30 ISO 35 ISO 40 ISO 45

ISO 50

• Reference edge is provided for zero set • The adapter is designed for the presetter and cannot be used on a machining center • Holders can be mounted with or without a coolant pipe

Precision Ground Taper Angle Tolerance AT1

62

Powered by