ACCESSORIES
REDUCTION ADAPTER Automatic Integrated Clamping
Type
Catalog Number
Loss in Z
Outer Taper
Inner Taper
Adapter will simultaneously clamp to the tool as it is clamped to the spindle. The adapter has an integrated calibration notch with calibration values etched onto the side plate.
32.310.100 32.310.101 32.310.102 32.310.103 32.310.110 32.310.111 32.310.112 32.310.114 32.310.116 32.310.119 32.310.120 32.310.121 32.310.122
ISO 40 ISO 30 ISO 45 ISO 30
ISO 50
-35mm
ISO 40
• Requires automatic clamping system
HSK-40A/C HSK-50A/C HSK-63A/C HSK-80A/C HSK-80FM
-80mm
ISO 50
C3 C4 C5 C6
-80mm
SPERONI STEEP TAPER / HSK MANUAL CLAMPING REDUCTION ADAPTER
Type Outer Taper Inner Taper
Type Outer Taper Inner Taper
Catalog Number
Catalog Number
Integrated clamping system ensures secure and repetitive clamping. The design allows for tool holder clamping without having to remove the coolant tube. Supplied with a precision ground calibration notch with calibration values etched onto the side plate.
32.110.001 32.110.001.1 32.110.002 32.110.003 32.110.004 32.110.005 32.110.006 32.110.007 32.110.008 32.110.009
32.110.010 32.110.011 32.110.012 32.110.013 32.110.014 32.110.019 32.110.020 32.110.021 32.110.022
HSK-32A/C
HSK-50F
HSK-32E HSK-32F
HSK-63A/C HSK-63B/D
HSK-40A/C HSK-40B/D
HSK-63E HSK-63F
ISO 50
ISO 50
HSK-40E HSK-40F
HSK-100A/C HSK-100B/D
HSK-50A/C HSK-50B/D
HSK-100E HSK-100F
HSK-50E
• For pull stud ISO 50 32.110.031
SPERONI STEEP TAPER NO CLAMPING REDUCTION ADAPTERS
SPERONI STEEP TAPER / BIG CAPTO FRONT CLAMP ADAPTER With the adapter mounted on the presetter, tools can be mounted/demounted using an allen key.
Supplied with a precision ground calibration notch with calibration values etched onto the side plate. A full taper allows for more spindle contact. Drop-in design used for accurately measuring Z (length) and X (diameter and runout).
Type
Catalog Number
Outer Taper
Inner Taper
32.110.050 32.110.051 32.110.052 32.110.053 32.110.054
C3 C4 C5 C6 C8
Type Outer Taper Inner Taper
Catalog Number
BT50
32.310.094 32.310.095 32.310.096 32.310.097 32.310.098
ISO 25 ISO 30 ISO 35 ISO 40 ISO 45
ISO 50
• Reference edge is provided for zero set • The adapter is designed for the presetter and cannot be used on a machining center • Holders can be mounted with or without a coolant pipe
Precision Ground Taper Angle Tolerance AT1
62
Powered by FlippingBook