MILLING CHUCK
MEGA PERFECT GRIP
COOLANT
H
Manual Clamping Hole
THROUGH
H 1
L 1
Coolant Pipe (Optional)
L
Catalog Number
Weight (lbs.)
ød
øD
L
L 1
H
H 1
Wrench
HSK-A63-MEGA16DPG-90
16mm 20mm
1.811 2.362 2.362 2.756 3.150 2.362 2.756 3.150 2.756 3.150 1.811 2.362 2.756 3.150
3.543 3.543 4.000 4.000 4.500 4.134 4.134 4.528 4.500 5.000 5.315 5.315 5.315 5.315
.945
1.850 1.929 1.929 2.165 2.244 1.929 2.165 2.322 2.165 2.244 1.850 1.929 2.165 2.322
.906 .945 .913
MGR46L MGR60L MGR60L MGR70L MGR80L MGR60L MGR70L MGR80L MGR70L MGR80L MGR46L MGR60L MGR70L MGR80L
3.5 4.4
-MEGA20DPG-100
1.063 1.072 1.318 1.622 1.063 1.299 1.614 1.299 1.622
.750
HSK-A100-MEGA.750DPG-4
9
-MEGA1.000DPG-4 -MEGA1.250DPG-4.5 -MEGA20DPG-105 -MEGA25DPG-105 -MEGA32DPG-115
1.000 1.250 20mm 25mm 32mm 1.000 1.250 16mm 20mm 25mm 32mm
1.024 1.102
9.9
11
.945 .906 .906
9
9.9
11 14
HSK-A125-MEGA1.000DPG-4.5
1.024 1.102
-MEGA1.250DPG-5 -MEGA16DPG-135 -MEGA20DPG-135 -MEGA25DPG-135 -MEGA32DPG-135
15.5
.945
.906 .945 .906 .906
13
1.063 1.299 1.614
14.7
16
17.2
• Key grip and spring are included, wrench must be ordered separately • CYLINDRICAL SHANK WITH FLAT SECTION JIS B 4005 (ISO3338-2) is required, for inch shank refer to Pg. 65, for metric shank refer to Pg.121 • H 1 is the dimension from the center of the Key Grip to the front end of the chuck • When coolant supply is from the cutting edge a seal bush is necessary, use instead of the spring; seal bush must be ordered separately
Always replace worn or damaged Key Grips immediately for safe operation. ! CAUTION
INCH
METRIC
Key Grip (2 pcs.)
Key Grip (2 pcs.)
Clamping ø
Spring
Clamping ø
Spring
PKG.750-2P PKG1.000-2P PKG1.250-2P
PSP1823 PSP2420 PSP3128
PKG16-2P PKG20-2P PKG25-2P PKG32-2P
PSP1519 PSP1823 PSP2420 PSP3128
.750
ø16 ø20 ø25 ø32
1.000 1.250
• Spare Key Grips are available in 2 pcs. per set
• Spare Key Grips are available in 2 pcs. per set
181
Powered by FlippingBook