TAP HOLDERS
MEGA SYNCHRO TAPPING HOLDER TAPPING RANGE: No.0-No.6 (M1-M3)z
Body
Micro Collet
Tap
Manual Clamping Hole
100
Micro Collet NBC4S-
64
22
Coolant Pipe (Optional)
12
Catalog Number
Weight (lbs.)
HSK-A63-MGT3-100
2.2
• Nut is included, collet and wrench must be ordered separately • When attaching or detaching the tap, a commercially available flat wrench (12mm width) is also required • Not capable of supplying coolant through the holder body
Cannot be used with machining center without synchronized tapping function. ! CAUTION
ACCESSORIES
COLLET PG. 334
MEGA NUT PG. 336
MEGA WRENCH PG. 368
MEGA SYNCHRO TAPPING HOLDER TAPPING RANGE: AU13/16-AU1-3/8 (M20-M36)
COOLANT
Body
Tap Holder
Tap
THROUGH
L
Coolant Pipe (Optional)
HSK No.
Catalog Number
Tapping Range d (Inch) AU13/16-AU1-3/8 AP3/8-AP1 AU13/16-AU1-3/8 AP3/8-AP1
Tapping Range d (Metric)
Weight (lbs.)
øD
L
HSK-A100-MGT36-165
M20-M36
3.70
6.50
18.0
HSK-A125-MGT36-170
M20-M36
3.71
6.69
22.4
• MGT Set Screw and adjust screw are included, coolant pipe, tap holder must be ordered separately
Cannot be used with machining center without synchronized tapping function. ! CAUTION
ACCESSORIES
TAP HOLDER PG. 382
SYNCHRO ADJUSTER PG. 383
O-RING PG. 383
SCREW PG. 383
197
Powered by FlippingBook