MEASURING INSTRUMENTS
BASE MASTER RED Independent body and measurement part. DLC coated Sensor Plate. Safe stroke amount of 5mm.
BODY SET
For All Workpieces and Machine Tools
LED Flashes To Indicate That Battery Life Is Low
All Supported All
1.181 ø.630
LED
LED
+0.01mm, 0 (+.0004", 0)
Height Accuracy
Magnet
Repeatability
±1μm (.00004")
Min. Tool Diameter Measuring Pressure
ø1mm (.04")
Battery
2N
ø1.732
Stroke
5mm (.197")
Catalog Number BM-50R BM-2R
H
Touch Signal
LED Illuminates (Red)
Battery
SR44 x 2
50mm
Battery Life
10 Continuous Hours
2.000
Weight
.44 lbs.
• Measurement part (BM-MEG) is included
MEASUREMENT PART ONLY
Measuring Surface
DLC Coating ø.630
Catalog Number BM-MEG
• Measurement part is also available separately
ø.709
BASE MASTER MICRO Cutting edge position detection of ø.05mm (ø.002") tool. Low-contact pressure cushion mechanism realizes measurement of ultra-small tools.
For All Workpieces and Machine Tools
LED Flashes To Indicate That Battery Life Is Low
All Supported All
LED
ø.709 ø.276
SMALL-DIAMETER TOOLS SUPPORTED
(Measuring Surface)
Measuring Surface (Ceramic)
+0.005mm, 0 (+.0002", -0) ±1μm (.00004") ø.05mm (.002")
Height Accuracy
Repeatability
LED
Min. Tool Diameter Measuring Pressure
.3N
Battery
Stroke
1mm (.040")
Touch Signal
LED Illuminates (Green)
Magnet
Battery
SR44 x 2
ø1.673
Battery Life
10 Continuous Hours
Min. Measurable Tool Diameter ø.05mm
Catalog Number BM-50M BM-2M
H
Weight
.53 lbs.
50mm
• Type without magnets is also available. If required, add /N at the end of the model number when ordering. (Example: BM-50M/N)
2.000
603
Powered by FlippingBook