MILLING CHUCKS
NEW Hi-POWER MILLING CHUCK CLAMPING RANGE: ø.750"-1.500" (ø.20-32mm) For Heavy Duty End Milling
COOLANT
THROUGH
L
H
E
BCV No.
R
S P I N D L E S Y S T E M DUA L CON T AC T
Catalog Number
Min Clamping Length E
Weight (lbs.)
ød
øD
øD 1
L
H
Wrench
.750
BCV40-HMC.750S-3.5
1.969 2.323 2.677 1.969 2.677 2.362 2.441 3.150 3.898 1.969 2.677
2.008 2.362 2.717 1.996 2.705 2.402 2.480 3.189 3.937 1.996 2.705
3.50 3.50 4.00 3.35 3.94 4.00 4.00 4.00 4.50 4.13 4.13
3.34 3.42 3.54
2.25 2.50 2.75 2.20 2.52 2.25 2.50 2.75 2.75 2.20 2.83
FK45-50L FK58-62L FK68-75L FK45-50L FK68-75L FK58-62 FK58-62 FK80-90 FK92-100 FK45-50L FK68-75L
3.4 4.2 4.7 3.4 4.4 9.3 8.9
-HMC1.000S-3.5 -HMC1.250S-4 -HMC20S-85 -HMC32S-100
1.000 1.250 20mm 32mm
2.72-3.11 3.03-3.42
.750
BCV50-HMC.750-4
3.34 3.54 4.13 4.21
-HMC1.000-4 -HMC1.250-4 -HMC1.500-4.5 -HMC20S-105 -HMC32S-105
1.000 1.250 1.500 20mm 32mm
10.2 13.2
2.72-3.11 3.46-3.86
8.4 9.6
• Wrench and axial adjusting screw must be ordered separately • When using center through coolant: - Set screw with sealing compound applied (standard accessory) should be used to plug an air bleeding hole - Oil hole type should be chosen when straight collet is required • “H” indicates the adjustment length with an adjusting screw • “H” dimension is the Max tool shank length that can be inserted into the holder
ACCESSORIES
PERFECT SEAL/ JET COLLET PG. 361
COLLET PG. 364
WRENCH PG. 367
SCREW PG. 390
66
Powered by FlippingBook