ANGLE HEADS
Catalog Number
Max RPM
Weight (lbs.)
ød
øE
G
K
L
L 1
L 2
M P
Q øF
Collet
BCV50-AG90/NBS10-315LS
12.40 13.58 14.76 16.34 17.52 18.70 20.28 21.46 22.64 12.40 13.58 14.76 16.34 17.52 18.70 20.28 21.46 22.64
2.17 7.17 3.35 8.35 4.53 9.53 2.17 11.10 3.35 12.28 4.53 13.47 2.17 15.04 3.35 16.22 4.53 17.40 2.17 7.17 3.35 8.35 4.53 9.53 2.17 11.10 3.35 12.28 4.53 13.47 2.17 15.04 3.35 16.22 4.53 17.40
42.5 43.4 44.1 52.2 53.1 53.8 61.9 62.8 63.5 42.8 43.7 44.3 52.5 53.4 54.0 62.2 63.1 63.7 45.2 54.9 64.6
-345LS -375LS -415LS -445LS -475LS -515LS -545LS -575LS
10.24
.059-.394
1.181 1.181 .984
14.17
1.77 1.69 3.583 NBC10-
6,000
18.11
-AG90/NBS13-315LS
-345LS -375LS -415LS -445LS -475LS -515LS -545LS -575LS
10.24
.098-.511
14.17
2.05 1.77 3.976 NBC13-o 6,000
1.378 1.220 1.102
18.11
-AG90/NBS20-330LS
12.99 10.24 2.76 7.76 16.93 14.17 2.76 11.69 20.87 18.11 2.76 15.63
.098-.787
-430LS -530LS
1.811 1.378 1.378
2.56 2.44 5.197 NBC20-
3,000
• Nut and wrench are included, collet must be ordered separately • Output spindles of twin head do not rotate in forward direction simultaneously • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable
• A stop block is required when mounting on machines must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY ENDMILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 338
WRENCH PG. 350
STOP BLOCK PG. 385
89
Powered by FlippingBook