High-pressure coolant adapters deliver coolant to the cutting edge without it passing through the stop block, improving cooling efficiency and chip removal.
ANGLE HEAD CENTER THROUGH TYPE Coolant Supply From Machine Spindle
ANGLE HEADS
ANGLE HEAD (CENTER THROUGH TYPE) High-pressure coolant adapters deliver coolant to the cutting edge without it passing through the stop block, improving cooling efficiency and chip removal.
R
SPINDLE SYSTEM DUAL CONTACT
•Supports coolant supply directly from the machine spindle •No additional stop block accessories needed to supply coolant through the angle head •Adapter enables coolant delivery directly to cutting edge •Enhances cooling efficiency and chip removal
2
MAX COOLANT PRESSURE 1000 PSI
HMC32S Type
Build-Up Type
By Changing the Adapter, it can be Used for Various Machining Applications.
High Rigidity Milling Chuck
Adapters that Enable Coolant Through the Tool are also Available.
ANGLE HEADS
TAG90 (BUILD-UP TYPE) By changing the adapter, it can be used for various types of processing.
1.772
9.06
1.772 1.772
.39 2.56 ø4.921
Gage Line for AG35 Adapters
ø1.500
MAX 3,000 RPM
R
SPINDLE SYSTEM DUAL CONTACT
R.827
Draw Bar
3.82
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle.
*HSK shank type is also available; please contact us for details • The tool rotates in the forward direction relative to the machine spindle • The angle of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines; must order separately • Coolant cannot be supplied through the stop block and locating pin • Maximum coolant flow rate 8 GPM, maximum coolant pressure 1000 PSI • Do not rotate the tool without supplying coolant • Automatic tool change may not be available depending on machine tool models • Wrench included
Catalog Number
Weight (lbs.)
BBT50-TAG90/AGH35-230 BCV50-TAG90/AGH35-230
34.4
3
(HIGH RIGIDITY BUILD-UP TYPE)
1.772
9.06
1.772 1.772
.39 2.56 ø4.921
Gage Line for AG35 Adapters
ø1.500
MAX 3,000 RPM
R
SPINDLE SYSTEM DUAL CONTACT
R.709 (S=3.150) R.827 (S=4.331)
Draw Bar
3.82
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle.
*HSK shank type is also available; please contact us for details • The tool rotates in the forward direction relative to the machine spindle • The angle of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines; must order separately • Coolant cannot be supplied through the stop block and locating pin • Maximum coolant flow rate 8 GPM, maximum coolant pressure 1000 PSI • Do not rotate the tool without supplying coolant • Automatic tool change may not be available depending on machine tool models • Wrench included
Weight (lbs.) S=4.331 S=3.150
Catalog Number
BBT50-TAG90/AGH35-230S BCV50-TAG90/AGH35-230S
37.3
35.7
ANGLE HEADS
AG35 HIGH PRESSURE COOLANT ADAPTER Max 1000 PSI, compatible with cutting edge coolant
Through Tools
øF=Minimum Bore Size that an AG35 Adapter Can Fit Into, Excluding the Cutting Tool
(NEW BABY CHUCK)
3.071 (Max Insertion Length)
Anti-Rotation Block (Optional) Model: AG35-BLHP
M10xP1.5
2.854
Baby Perfect Seal (Optional)
Catalog Number
Weight (lbs.)
ød
øF
AG35-ONBS20HP
.118-.787 7.677 3.1
Coolant Must Be a Water-Soluble Emulsion
• BABY PERFECT SEAL NUT with sealing mechanism is required; must be ordered separately • Collet and wrench must be ordered separately • Please order the anti-rotation block set for use (Model: AG35-BLHP) • Maximum coolant flow rate 8 GPM, maximum coolant pressure 1000 PSI
4
(SIDE LOCK)
3.504 (Max Insertion Length)
Anti-Rotation Block (Optional) Model: AG35-BLHP
M10xP1.5
3.287
Catalog Number
Weight (lbs.)
ød
øF
AG35-OSL20HP
.787 7.795 3.5
Coolant Must Be a Water-Soluble Emulsion
• Please order the anti-rotation block set for use (Model: AG35-BLHP) • Maximum coolant flow rate 8 GPM, maximum coolant pressure 1000 PSI
The AG35 Adapter Can Also Be Used When using the AG35 ADAPTER Hi-JET HOLDER Type, max coolant pressure is 290 PSI
ANGLE HEADS
TAG90/AGH35 Application Example
Head
BBT50-TAG90/AGH35-230S
Adapter
AG35-ONBS20HP
AG35-OSL20HP
Tool
ø394" Solid Carbide Drill
ø.669" Indexable Drill
Workpiece
Stainless Steel
Carbon Steel
Cutting Depth
1.969" (5xD)
1.969" (3xD)
Cutting Speed
262 SFM
394 SFM
Cutting Feed
.008 IPR
.004 IPR
Spindle Speed
2,546 RPM
2,247 RPM
Feed Rate
20.0 IPM
8.9 IPM
Coolant
Tip Lubrication 1000 PSI
Tip Lubrication 725 PSI
Results: Improved machining conditions due to enhanced chip removal and cutting edge cooling.
5
For Tool Holder Accessories, See Our High Performance Tooling Solutions Catalog
ANGLE HEADS
ANGLE HEADS
TAG90 (HMC32S TYPE)
1.772
9.06
ø2.68
ø4.921
1.772 1.772
ød
MAX 3,000 RPM
3.82
R.827
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max Insertion Length H
Min Insertion Length E
Weight (lbs.)
ød
BBT50-TAG90/HMC32S-230 BCV50-TAG90/HMC32S-230 BCV50-TAG90/HMC1.250S-230
32mm
3.740
2.559
37.0
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle.
1.250
*HSK shank type is also available; please contact us for details • The tool rotates in the forward direction relative to the machine spindle • The angle of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines; must order separately • Coolant cannot be supplied through the stop block and locating pin
• Maximum coolant flow rate 8 GPM, maximum coolant pressure 1000 PSI • Do not rotate the tool without supplying coolant • Automatic tool change may not be available depending on machine tool models • Wrench included (Model: FK68-75L)
7
TAG90 (HIGH RIGIDITY HMC32S TYPE)
1.772
9.06
ø2.68
1.772 1.772
ø4.921
ød
MAX 3,000 RPM
3.82
R.709 (S=3.150) R.827 (S=4.331)
R
SPINDLE SYSTEM DUAL CONTACT
Weight (lbs.) S=4.331 S=3.150
Catalog Number
Max Insertion Length H
Min Insertion Length E
ød
BBT50-TAG90/HMC32S-230S
32mm
BCV50-TAG90/HMC32S-230S BCV50-TAG90/HMC1.250S-230S 1.250
3.740
2.559
39.9
38.4
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle.
*HSK shank type is also available; please contact us for details • The tool rotates in the forward direction relative to the machine spindle • The angle of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines; must order separately • Coolant cannot be supplied through the stop block and locating pin
• Maximum coolant flow rate 8 GPM, maximum coolant pressure 1000 PSI • Do not rotate the tool without supplying coolant • Automatic tool change may not be available depending on machine tool models • Wrench included (Model: FK68-75L)
CRAFTED FOR PERFORMANCE. BIG DAISHOWA is a superior tooling partner that can improve the performance of your toughest applications and deliver savings you can see—and feel. Put BIG DAISHOWA to the test and see the big difference one tool can make for your operation.
HIGHER PERFORMANCE. GUARANTEED. Tool Holders | Boring Tools | Cutting Tools | Workholding | Tool Measuring BIG DAISHOWA Inc. 2600 Huntington Blvd | Hoffman Estates, IL 60192 (224) 770-2999 | bigdaishowa@us.bigdaishowa.com | bigdaishowa.com
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Powered by FlippingBook