G G G G MAX 60,000 RPM MAX 50,000 RPM MAX 45,000 RPM G G MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM G G MAX 2,000 RPM MAX 8,000 RPM MAX 4,000 RPM MAX 40,000 RPM 33,000 RPM
38,0 RP
35,000 RPM
MAX 45,00 RPM
MAX 40,000 RPM
ANGLE HEADS
MAX 60,00 RPM
AGU30 TYPE CLAMPING RANGE: Ø.098"-.787" For Angular Operations
L L
MAX 50,000 RPM
L 1 L 1
L 2
Max F 2 Max F 2 L 2
Ø3.819 Ø3.819
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
M M
R.709 R.709
Fig. 1 Fig. 1
Fixed Length A .197 Pin Compression Fixed Length A .197 Pin Compression
L L
L 1 L 1
L 2
Max F 2 Max F 2 L 2
ANGLE ADJUSTMENT BY ALIGNING DIVISIONS Spindle angle is easily adjustable from 0º to 30º using the scale indication on the body.
Ø4.921 Ø4.921
MAX 8,000 RPM MAX 4,000 RPM
MAX 2,000 RPM
R.827 R.827
M M
Fig. 2 Fig. 2
.236 Collar Compression (#50 Only) .236 Collar Compression (#50 Only)
Fixed Length A .118 Pin Compression Fixed Length A .118 Pin Compression
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max RPM
Weight (lbs.)
Fig.
Ød
ØE G L
L 1
L 2
M P Q F 1
F 2
Collet
BCV40-AGU30/NBS13-250 BCV50-AGU30/NBS20-295
.098-.512 .098-.787
1 2
1.378 1.142 9.84 5.71 4.13 5.79 1.34 1.18 2.07 .55 NBC13- o 1.811 1.437 11.61 6.50 5.12 6.38 1.77 1.54 2.56 .67 NBC20- o
6,000 15.3 4,000 35.8
• Nut and wrench are included; collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • Automatic tool change may not be available depending on machine tool models • When supplied through the stop block, coolant can be ejected from the housing
A stop block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 360
WRENCH PG. 389
STOP BLOCK PG. 407
STOP BLOCK PG. 407
SETTING DISC (INCLUDED) For the precise adjustment of spindle angle or direction.
Clamp the Setting Disc Into the Angled Spindle
Check the Cutter Alignment and the Setting Angle
105
Powered by FlippingBook