MAX 28,000 RPM
MAX 25,000 RPM
MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM MAX 20,000 RPM 30,000 MAX 40,000 RPM MAX 35,000 RPM MAX 2,000 RPM MAX 50,000 RPM MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
ANGLE HEADS
MAX 32,000 RPM
AG90 HMC TYPE For Heavy Duty End Milling
1.772
9.06
MAX 8,000 RPM MAX 4,000 RPM MAX 60,000 RPM MAX 45,000 RPM MAX 33,000 RPM
MAX 38,000 RPM
Ø3.19
1.772 1.772
Ø1.250 (Ø32mm)
Ø4.921
3.82 .236 Collar Compression .118 Pin Compression
R .827
Fixed Length A
!
CAUTION
R
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle.
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Weight (lbs.)
• Wrench is included • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models
BBT50-AG90/HMC1.250-230 BBT50-AG90//HMC32-230
37.0
For Applications Where Increased Rigidity is Required
1.772
9.06
Ø3.19
1.772 1.772
Ø1.250 (Ø32mm)
Ø4.921
MAX 8,000 RPM MAX 4,000 RPM
MAX 2,000 RPM
3.82
.118 Pin Compression .236 Collar Compression
R .827
Fixed Length A
!
CAUTION
R
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle.
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Weight (lbs.)
• Wrench is included • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models
BBT50-AG90/HMC1.250-230S BBT50-AG90//HMC32-230S
39.9
ACCESSORIES
COLLET PG. 386
WRENCH PG. 389
STOP BLOCK PG. 407
163
Powered by FlippingBook