BIG DAISHOWA High Performance Tooling Solutions Vol 1

MAX 40,000 RPM MAX 45,000 RPM MAX 50,000 RPM MAX 60,000 RPM MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM 33,000 RPM

MAX 45,00 RPM 38,0 RP

35,000 RPM

MAX 40,000 RPM

ANGLE HEADS

MAX 60,00 RPM

AGU30 TYPE CLAMPING RANGE: Ø.098"-.787" For Angular Operations

MAX 50,000 RPM

L

L 2

L 1

G G

Max F 2

Ø3.819

MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM

M .197 Pin Compression Fixed Length A

Fig. 1

L

L 2 Max F 2

L 1

G G

ANGLE ADJUSTMENT BY ALIGNING DIVISIONS Spindle angle is easily adjustable from 0º to 30º using the scale indication on the body.

Ø4.921

MAX 8,000 RPM MAX 4,000 RPM

MAX 2,000 RPM MAX 8,000 RPM MAX 4,000 RPM

MAX 2,000 RPM

M

.236 Collar Compression (#50 Only)

Fixed Length A .118 Pin Compression

R

Fig. 2

S P I N D L E S Y S T E M DUA L CON T AC T

Catalog Number

Max RPM

Weight (lbs.)

Fig.

Ød

ØE G L

L 1

L 2

M P Q F 1

F 2

Collet

BBT40-AGU30/NBS13-240 BBT50-AGU30/NBS20-295

.098-.512 .098-.787

1 2

1.378 1.142 9.45 5.32 4.12 5.79 1.34 1.18 2.07 .55 NBC13- o 1.811 1.437 11.61 6.50 5.12 6.38 1.77 1.54 2.56 .67 NBC20- o

6,000 15.3 4,000 35.8

• Nut and wrench are included, collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • Automatic tool change may not be available depending on machine tool models • When supplied through the stop block, coolant can be ejected from the housing

A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION

ACCESSORIES

COLLET PG. 360

WRENCH PG. 389

STOP BLOCK PG. 407

STOP BLOCK PG. 407

SETTING DISC (INCLUDED) For the precise adjustment of spindle angle or direction.

Clamp the Setting Disc Into the Angled Spindle

Check the Cutter Alignment and the Setting Angle

165

Powered by