COLLET CHUCK
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØD ØD 1
L
L 1
H
Collet
Nut
Wrench
HSK-A100-MEGA6E-75 v HSK-A100-MEGA6E-90 HSK-A100-MEGA6E-105 HSK-A100-MEGA6E-120 HSK-A100-MEGA6E-135 HSK-A100-MEGA6E-165 HSK-A100-MEGA8E-75 v HSK-A100-MEGA8E-90 HSK-A100-MEGA8E-105 HSK-A100-MEGA8E-120 HSK-A100-MEGA8E-135 HSK-A100-MEGA8E-165 HSK-A100-MEGA10E-80 v HSK-A100-MEGA10E-90 v HSK-A100-MEGA10E-105 HSK-A100-MEGA10E-120 HSK-A100-MEGA10E-135 HSK-A100-MEGA10E-165 HSK-A100-MEGA13E-90 v HSK-A100-MEGA13E-105 HSK-A100-MEGA13E-120 HSK-A100-MEGA13E-135 HSK-A100-MEGA13E-165
1.10 1.16 1.28 1.38 1.48 1.69 1.30 1.36 1.46 1.56 1.67 1.87 1.48 1.56 1.65 1.75 1.85 2.07 1.81 1.91 2.03 2.13 2.32
2.95 3.54 4.13 4.72 5.31 6.50 2.95 3.54 4.13 4.72 5.31 6.50 3.15 3.54 4.13 4.72 5.31 6.50 3.54 4.13 4.72 5.31 6.50
1.30 1.89 2.48 3.07 3.66 4.84 1.30 1.89 2.48 3.07 3.66 4.84 1.50 1.89 2.48 3.07 3.66 4.84 1.89 2.48 3.07 3.66 4.84
1.81
5.5 5.7 6.0 6.2 6.4 7.1 5.5 5.7 6.2 6.4 6.8 7.5 5.7 6.0 6.4 6.8 7.3 8.2 6.4 6.8 7.3 7.9 9.3
24,000
20,000
.125-.250 (3-6mm)
1.984
MEN6 MGR25
MEC6- o
1.46-1.77
18,000
14,000
1.81
24,000
20,000
.125-.250 (3-8mm)
1.181
MEN8 MGR30
MEC8- o
1.65-2.01
18,000
16,000
2.01 2.40
22,000
20,000
.125-.375 (3-10mm)
1.378
MEN10 MGR35
MEC10- o
1.89-2.28
18,000
16,000 20,000 18,000
1.97
.125-.500 (3-12mm)
1.654
MEN13 MGR42
MEC13- o
1.97-2.40
16,000
14,000
• MEGA E NUT is included; coolant pipe, collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds
• “H” indicates the adjustment length with an adjusting screw • Adjusting screws cannot be used with models marked v
ACCESSORIES
COLLET PG. 380
MEGA NUT PG. 381
PERFECT SEAL PG. 381
MEGA WRENCH PG. 390
SCREW PG. 411
187
Powered by FlippingBook