MAX 28,000 RPM
MAX 25,000 RPM
MAX 20,000 RPM
MEGA NEW BABY CHUCK OVERVIEW
R
MAX 32,000 RPM
MAX 30,000 RPM
MAX 33,000 RPM
MAX 38,000 RPM
MAX 35,000 RPM
R
CLAMPING RANGE: Ø.010"-1.000" (Ø.25-25.4mm) High-speed design, offered in six different collet series sizes. Utilizes ultra precise NEW BABY COLLETS which guarantee a runout at the collet nose of less than .00004". MAX 40,000 RPM MAX 45,000 RPM R
MAX 50,000 RPM
MAX 60,000 RPM
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
R
R
Reaming
Reaming
Reaming
Tap Tappin
Tapping
Drilling
End Milling
Drilling
Drilling
End Milling
End Milling
SPINDLE SYSTEM DUAL CONTACT
CAUTION! Tool Extension Less Rigid !
CAUTION! Tool Extension Less Rigid !
Tool Extension Less Rigid !
Maximum Performance!
Maximum Performance!
Maximum Performance!
CAUTION!
CAUTION! Tool Extension Less Rigid !
CAUTION! Tool Extension Less Rigid !
Tool Extension Less Rigid !
WIDE RANGE AVAILABLE AS STANDARD Ideal length and diameter of the holder is the key to precision machining. If selection is limited, an increased tool extension reduces performance. Chamfering Chamfering Chamfering
CAUTION!
Back Chamfering Face Milling Back Chamfering Face Milling Back Chamfering Face Milling
Cham Chamfe Chamfering
IDEAL CONDITION!
IDEAL CONDITION!
IDEAL CONDITION!
R
HIGH PRECISION COLLET, CLOSE TO SUBMICRON NEW BABY COLLET
Chamfering TWO WAY COOLANT SEALED COLLET NUT MEGA PERFECT SEAL • Standard NBC collet is used • High dust resistance
HIGH PRECISION
THROUGH TOOLS Back Chamfering
JET THROUGH
MAX 8,000 RPM MAX 4,000 RPM
Back Chamfering
Back Chamfering
Chamfering
Chamfering
The NBC collet is 100% inspected to guarantee accuracy. Material, production, heat treatment... everything is selected for precision.
MAX 2,000 RPM
STRICT GAGE CONTROL
AT COLLET NOSE 3µm at end of test bar 1 µm
Tools with Holes
Tools without Holes
.00004"
.00012"
4d
Plu Mil Plung Millin
Plunge Milling
Shoulder Milling
Shoulder Milling
Shoulder Milling
Helical Milling
Helical Milling
Helical Milling
Ramping
Ramping
Ramping
All BIG Collets are AA Grade and inspected twice for accuracy
All Supported LED All
All Supported LED All
All Supported LED All
LIVE
LIVE
LIVE
Battery Alarm Buzzer
Battery Alarm Buzzer
Battery Alarm Buzzer
Conductivity
Conductivity
Conductivity
NEW BABY Collet
MEGA NEW BABY Nut
NBC (Standard)
Short Type
THROUGH TOOLS
PG. 366
PG. 360
MEGA PERFECT Seal
MPS
NBC-E (For Endmill)
Adjusting Screw
PG. 368
JET THROUGH
PG. 362
Without PS Ring
MEGA NEW BABY Nut
PG. 390 PG. 391
THROUGH TOOLS
MEGA Wrench MEGA Torque Wrench
FONBC Coolant Collet
PG. 364
19
Powered by FlippingBook