120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
ANGLE HEADS
AG90 COMPACT TYPE CLAMPING RANGE: Ø.098"-.512" For Drilling Only — Ideal Size for Small Machining Centers
L
.984
L 1
1.969 2.717
Ø1.378
NBS13
Coolant Pipe (Optional)
Ød
Coolant Pipe (Optional)
MAX 8,000 RPM MAX 4,000 RPM
MAX 2,000 RPM
PT1/8
M
1.417
Fig. 1
Fig. 2
L
.984
.984
L
L 1
L 1
1.969 2.717
1.969 2.717
Ø1.378
Ø1.378
NBS13
NBS13
Coolant Pipe (Optional)
Ød
Ød
Coolant Pipe (Optional)
PT1/8
M
1.417
Fig. 1
M
PT1/8
1.417
Fig. 2
Catalog Number
Speed Ratio
Weight (lbs.)
Fig.
Ød
L
L 1
M
Collet
HSK-A63-AG90-13-135 HSK-A63-AG90-13-185 HSK-A100-AG90-13-145 HSK-A100-AG90-13-195
5.31 7.28 5.71 7.68
1.34 3.31 1.34 3.31
1.10 3.06 1.10 3.06
4.4 5.4 6.8 7.8
.098-.512
1
NBC13
1:1
.098-.512
2
NBC13
1:1
• Nut and wrench are included; coolant pipe and collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • A tapped hole (PT1/8) is prepared at the bottom cover of the Locating Pin housing so that a pipe for coolant can be connected • Automatic tool change may not be available depending on machine tool models • NEW BABY END MILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). AG90 Compact Type is for drilling only. ! CAUTION
ACCESSORIES
COLLET PG. 360
WRENCH PG. 389
STOP BLOCK PG. 407
APPLICATION EXAMPLE
Stable machining is obtained due to high rigidity and good runout.
DRILLING
Cutter
Ø.472" (12mm) Carbide Drill
Workpiece
1050 Steel
Cutting Speed
230 SFM 14.6 IPM .008 IPR
Cutting Feed
Spindle Speed
1,860 RPM
212
Powered by FlippingBook