MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
ANGLE HEADS
AG45 NBS CLAMPING RANGE: Ø.060"-.512" Exclusive fixing housing allows for secure diagonal machining
L
L 1
Coolant Pipe (Optional)
Ø3.819
MAX 8,000 RPM MAX 4,000 RPM
45º
MAX 2,000 RPM
Fig. 1
M
L
L 1
Coolant Pipe (Optional)
G G
Ø3.819
45º
R.827
M
Fig. 2
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Speed Ratio
Weight (lbs.)
Fig.
Ød
ØD G
L
L 1
M P
Q ØF
Collet
HSK-A63-AG45/NBS10-230 HSK-A63-AG45/NBS13-235 HSK-A100-AG45/NBS10-270 HSK-A100-AG45/NBS13-275
.060-.394 .098-.512 .060-.394 .098-.512
1.181 1.378 1.181 1.378
9.06 3.94 4.80 .79 9.25 4.13 5.00 .98 10.63 3.94 5.00 .79 10.83 4.13 5.20 .98
NBC10 NBC13 NBC10 NBC13
12.3 12.6 27.3 27.6
1
1.181
2.03 3.54
1:1
2
1.181
2.03 3.54
1:1
• Nut and wrench are included; coolant pipe and collet must be ordered separately • Output spindles do not rotate in forward direction simultaneously • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY END MILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 360
WRENCH PG. 389
STOP BLOCK PG. 407
214
Powered by FlippingBook