16,000 RPM
17,000 RPM
MAX 28,000 RPM
MAX 25,00 RPM
MAX 20,000 RPM
COLLET CHUCKS
MEGA MICRO CHUCK CLAMPING RANGE: Ø.018"-.238" (Ø.45-6.05mm) For Micro Drill & End Mill Applications
MAX 32,000 RPM
MAX 30,000 RPM
H 2
H 2
H 1
H 1
MAX 33,000 RPM
MAX 38,00 RPM
MAX 35,000 RPM
G
G
5º
L 1
L 1
MAX 45,000 RPM
MAX 40,000 RPM
L
L
Fig. 1 (High Rigidity Type)
Fig. 2 (Straight Type)
Catalog Number
Max RPM
MAX 60,000 RPM Weight (lbs.) 1.5
Fig.
Ød
ØD L
L 1
H 1
H 2
G
Collet
MAX 50,000 RPM Wrench MGN4S MGR12 MGN6S MGR14 MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM MGN8S MGR25 MGN4S MGR12 MGN6S MGR14 Nut
HSK-F63-MEGA4S-75T HSK-F63-MEGA6S-75T HSK-F63-MEGA8S-75T HSK-F63-MEGA4S-75 HSK-F63-MEGA4S-105 HSK-F63-MEGA6S-75 HSK-F63-MEGA6S-90 HSK-F63-MEGA6-105
.018-.159 .018-.238 .116-.317
.472 2.95 1.73 1.04 1.61 M5 P0.8 NBC4S- o
.551 .709
1.12 1.61 M7 P0.75 NBC6S- o 1.22 2.28 M9 P0.75 NBC8S- o
1.5 1.5 1.5 1.5 1.5 1.6 1.7
1
32,000
2.95 1.73
2.95 1.54 4.13 2.99 2.95 1.81 3.54 2.40 4.13 2.99
1.61 1.85 1.61
30,000 25,000 30,000 27,000 25,000
.018-.159
.472
1.04
M5 P0.8 NBC4S- o
2
.018-.238
.551
1.12
M7 P0.75 NBC6S- o
1.93
• MEGA MICRO NUT is included; coolant pipe, collet and wrench must be ordered searately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • Contact us for a plug screw to block a coolant through hole • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
ACCESSORIES
COLLET PG. 356
MEGA NUT PG. 358
PERFECT SEAL PG. 358
MEGA WRENCH PG. 390
MAX 8,000 RPM MAX 4,000 RPM
MAX 2,000 RPM
229
Powered by FlippingBook