16,000 RPM
17,000 RPM
MAX 28,000 RPM
MAX 25,00 RPM
MAX 20,000 RPM
COLLET CHUCKS
MEGA E CHUCK CLAMPING RANGE: Ø.125"-.500" (Ø3-12mm) Exclusively for High Speed Finish End Milling
COOLANT MAX 32,000 RPM THROUGH MAX 33,000 RPM
MAX 30,000 RPM
L
MAX 38,00 RPM
MAX 35,000 RPM
L 1
H
MAX 45,000 RPM
MAX 40,000 RPM
Adjusting Screw (Optional)
MAX 50,000 RPM Wrench
MAX 60,000 RPM Weight (lbs.)
Catalog Number
Max RPM
Ød
ØD ØD 1
L
L 1
H
Collet
Nut
HSK-F63-MEGA6E-65 v HSK-F63-MEGA6E-90 HSK-F63-MEGA8E-65 v HSK-F63-MEGA8E-90 HSK-F63-MEGA10E-75 v HSK-F63-MEGA10E-90 v HSK-F63-MEGA10E-105 HSK-F63-MEGA10E-120 HSK-F63-MEGA10E-135 HSK-F63-MEGA13E-75 v HSK-F63-MEGA13E-90 v HSK-F63-MEGA13E-105 HSK-F63-MEGA13E-135
1.11 1.23 1.29 1.43 1.51 1.62 1.73 1.84 1.93 1.80 1.90 2.01 2.04
2.56 3.54 2.56 3.54 2.95 3.54 4.13 4.72 5.31 2.95 3.54 4.13 5.31
1.34
1.54
1.8 2.0 1.8 2.2 2.2 2.6 2.9 3.5 4.0 2.4 3.1 3.5 4.4
.125-.250 (3-6mm)
.984
MEN6 MGR25 30,000
MEC6- o
2.28 1.46-1.77
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
1.34
1.61
.125-.250 (3-8mm)
1.181
MEN8 MGR30 30,000
MEC8- o
2.32 1.65-1.85
1.73 2.32 2.95 3.58 4.21 1.85 2.44
1.89 2.64
30,000
.125-.375 (3-10mm)
1.378
MEN10 MGR35
MEC10- o
29,000
1.89-2.28
27,000
1.97 2.52
30,000
.125-.500 (3-12mm)
1.654
MEN13 MGR42
MEC13- o
3.07 1.97-2.28 4.25 1.97-2.36
29,000 26,000
• MEGA E NUT is included; coolant pipe, collet, wrench and adjusting screw must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw • Contact us for a plug screw to block a coolant through hole • Adjusting screws cannot be used with models marked v • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
MAX 8,000 RPM MAX 4,000 RPM
MAX 2,000 RPM
ACCESSORIES
COLLET PG. 380
MEGA NUT PG. 381
PERFECT SEAL PG. 381
MEGA WRENCH PG. 390
SCREW PG. 411
231
Powered by FlippingBook