10,000 RPM
12,000 RPM
14,000 RPM
MAX 16,000 RPM
MAX 17,000 RPM
COLLET CHUCKS
MEGA DOUBLE POWER CHUCK CLAMPING RANGE: Ø16-32mm For Heavy Duty End Milling
COOLANT MAX 25,000 RPM THROUGH
MAX 28,000 RPM
MAX 20,000 RPM
H
E 1 E
MAX 32,000 RPM
MAX 30,000 RPM
MAX 33,000 RPM
MAX 38,000 RPM
MAX 35,000 RPM
L 1
L
MAX 45,000 RPM E 1
MAX 40,000 RPM E
Min. Clamping Length
Catalog Number
Weight (lbs.)
ød
øD
øD 1
L
L 1
H
Wrench
HSK-F63-MEGA16D-80A HSK-F63-MEGA20D-90A HSK-F63-MEGA25D-100A HSK-F63-MEGA32D-105A
16mm 20mm 25mm 32mm
1.654 1.969 2.441 2.756
2.087 2.165 2.480 2.795
3.15 3.54 3.94 4.13
.98
2.17 2.56 2.95 3.15
1.89 1.97
1.97 2.20
MGR42L MGR50L MGR62L MGR70L
2.6 3.1 4.0 4.4
1.34 1.54 1.30
MAX 50,000 RPM 2.20 2.36
MAX 60,000 RPM 2.24 2.52
• Wrench must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” dimension is the Max tool shank length that can be inserted into the holder • Contact us for a plug screw to block a coolant through hole • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM H
H
COOLANT
JET THROUGH
Min. Clamping Length E
THROUGH
L 1
L
MAX 8,000 RPM MAX 4,000 RPM
Catalog Number
Weight (lbs.)
Ød
ØD
ØD 1
L
L 1
E
Wrench
HSK-F63-MEGA16DS-80A HSK-F63-MEGA20DS-90A HSK-F63-MEGA25DS-100A HSK-F63-MEGA32DS-105A
16mm 20mm 25mm 32mm
1.654 1.969 2.441 2.756
2.087 2.165 2.480 2.795
3.23 3.62 4.02 4.21
1.06 1.42 1.61 1.38
2.24
1.89 1.97 2.20 2.36
MGR42L MGR50L MGR62L MGR70L
2.6 3.1 4.0 4.4
MAX 2,000 RPM 2.64 3.03 3.23
• Wrench must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • Jet-through type provides coolant form the chuck nose, thus tools with oil holes cannot be used • “H” dimension is the Max tool shank length that can be inserted into the holder • Contact us for a plug screw to block a coolant through hole • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools ACCESSORIES
PERFECT SEAL/ JET COLLET PG. 383
COLLET PG. 386
MEGA WRENCH PG. 390
232
Powered by FlippingBook