HYDRAULIC CHUCKS
SUPER SLIM TYPE CLAMPING RANGE: Ø3mm-12mm For Drills, Reamers, Ball Mills, End Mills, Diamond Reamers & Grinding Tools
COOLANT
THROUGH
Min. Clamping Length E Max. Insertion Depth H
L 1
L
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØD
ØD1
ØD 2
L
L 1
H
E
HSK-F63-HDC3S-75 HSK-F63-HDC4S-75 HSK-F63-HDC6S-75 HSK-F63-HDC8S-75 HSK-F63-HDC10S-75 HSK-F63-HDC12S-75
.63 .75 .98
30,000 30,000 30,000 30,000 30,000 30,000
2.2 2.2 2.2 2.2 2.2 2.2
3mm 4mm 6mm 8mm
.551
.787
1.02
1.890
2.95
2.56
.669 .748 .827
.906
1.22 1.30 1.42
1.06
10mm 12mm
1.024 1.102
1.10
• Adjusting screws cannot be used • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
Use only cutting tools that have a shank tolerance of h6. Do not use with cutting tools made with a flat on the shank (ie: Weldon type shank). Roughing end mills are not recommended for use with hydraulic chucks. Do not tighten the clamping screw without first inserting a cutting tool into the tool holder. Always insert the cutting tool into the hydraulic tool holder beyond min. clamping length “E”. ! CAUTION
233
Powered by FlippingBook