BIG DAISHOWA High Performance Tooling Solutions Vol 1

CLEANERS

TK CLEANER Perfect for HYDRAULIC CHUCKS, MILLING CHUCKS and SHRINK FIT HOLDERS It is very difficult to remove oil and chips stuck to clamping bores, even with a wiping cloth or air spray. TK Cleaner cleans the clamping bore of a tool holder to maintain the high performance of tool holders.

L

Exclusive Synthetic Leather Strips

Catalog Number

Bore Ø (metric)

Bore Ø (inch)

Cleaning Length L

Leather Strip Qty.

TKC13 TKC14 TKC15 TKC16 TKC18 TKC20 TKC25 TKC32 TKC40 TKC42

13mm 14mm 15mm 16mm 18mm 20mm 25mm 32mm 40mm 42mm

.500

— —

2.36

2

.625

2.76

.750

1.000 1.250

3.15 3.94

3

— —

4

4.13

HOW TO USE

1

1

1

3

3

3

2

2

2

IN

IN

IN

Rotate and remove the TK Cleaner to clear oil and particles.

Rotate and remove the TK Cleaner to clear oil and particles.

Rotate and remove the TK Cleaner to clear oil and particles.

Spring action draws back the sliding section when released so the cleaning strips contact the bore surface.

Spring action draws back the sliding section when released so the cleaning strips contact the bore surface.

Spring action draws back the sliding section when released so the cleaning strips contact the bore surface.

Slide the upper section forward to reduce diameter and insert in the clamping bore.

Slide the upper section forward to reduce diameter and insert in the clamping bore.

Slide the upper section forward to reduce diameter and insert in the clamping bore.

394

Powered by