SERIES 319 SW BACK BORING INSERT HOLDERS These insert holders are made for back boring with the twin cutter rough boring heads Series 319 SW32-SW148 and cover the diameter range from Ø1.732"-8.307".The set contains one insert holder and one blank piece.
L 2
L 1
Boring Head SW32 SW41 SW53 SW68
Catalog Number
Reference Number 10.639.403 10.639.404 10.639.405 10.639.406 10.639.407 10.639.408 10.639.409 10.639.410 10.639.407 10.639.408 10.639.409 10.639.410
Insert
ØD
ØD 1
L 1 *
L 2 *
IH1SW32BB IH1SW41BB IH1SW53BB IH1SW68BB IH1SW98BB IH2SW98BB IH1SW148BB IH2SW148BB IH1SW98BB IH2SW98BB IH1SW148BB IH2SW148BB
1.732-2.126 2.087-2.598 2.559-3.228 3.189-4.055 4.016-5.118 5.079-6.181 6.142-7.244 7.205-8.307 4.016-5.118 5.079-6.181 6.142-7.244 7.205-8.307
1.220 1.535 1.969 2.500
.945
1.496 1.732 2.165 2.598
CC..09
1.142 1.339 1.614
SW98 (CKB6/CKN6)
3.543
1.496
2.717
SW148 (CKB6/CKN6)
CC..12
5.512
SW98 (CKB7/CKN7)
3.543
1.850/3.031
3.071/4.252
SW148 (CKB7/CKN7)
5.512
3.031
4.252
ACCESSORIES
*With SW98L x CKB7/CKN7 • Insert holder must be mounted on RSS/BALANCED side of boring head
SPARE PARTS PG. 543
ØC
ØD 1
BACK BORE & ENTRY BORE DIAMETERS Maximum Back Bore Diameter "D"
D Max = (2xC)-D 1 D 1 Max = (2xC)-D C Min = (D+D 1 )/2
Maximum Body Diameter "D 1 " Minimum Entry Bore Diameter "C"
ØD
424
Powered by FlippingBook