Hi-JET HOLDER OVERVIEW
Coolant feed for water-soluble coolant only. Bearings are in a separate housing from the coolant for extended life. Hi-JET HOLDER UP TO 3,900 SFM UP TO 6,600 SFM MAX 10,000 RPM
MAX 12,000 RPM
MAX 16,000 RPM
MAX 17,000 RPM
R
SPINDLE SYSTEM DUAL CONTACT
MAX 28,000 RPM
MAX 20,000 RPM
SUITABLE FOR SMALL DIAMETER CUTTERS DUE TO HIGH SPEED AND PRESSURE Small diameter cutters require high spindle speeds to maintain high cutting speed
NON-CONTACT SEAL DESIGN ELIMINATES WEAR DAMAGE TO BODY
Competitor Design
Bearing
MAX 32,000 RPM
MAX 30,000 RPM
Wear Part
MAX 33,000 RPM
MAX 35,000 RPM
MAX 40,000 RPM and high coolant pressure due to their small diameter coolant holes. The Hi-JET HOLDER accepts even smaller diameter shanks, providing high spindle speeds (Max 10,000 RPM) and high coolant pressures (Max 284 PSI). EASY MAINTENANCE BY REPLACEMENT OF WORN Easily replaceable Merit Sets consist of Merit Plates, Merit Rings and O-Rings.
Cutting particles in coolant, high speed operation and high pressure cause wear.
Seal
Wear Part
MAX 45,000 RPM
MAX 50,000 RPM
MAX 60,000 RPM
Merit Plate
Hi-JET HOLDER
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
Bearing
Merit Ring
A Variety of Hi-JET HOLDERS Available
Rotating Part Merit Plate
Stationary Part Merit Ring
Split Construction
Ideal mechanical sealing construction enables use under high speed and high pressure cutting conditions, preventing the main body from wear damage.
NEW BABY Chuck Type
Collet Chuck Type
MAX 8,000 RPM
BIG KAISER Shank Type
Side Lock Type
46
MAX 2,000
MAX 4,000
Powered by FlippingBook