Back Chamfering
Back Chamfering
Chamfering
Chamfering
Chamfe Ch
MEASURING INSTRUMENTS
C C
Plunge Milling
Shoulder Milling
Shoulder Milling
H M
Helical Milling
Ramping
Ramping
POINT MASTER PRO—PMPC SERIES Touch Probe & Edge Finder Instantaneously detects reference points even on non-conductive workpieces and machines. Notification of touchpoint with LED and beep.
For All Workpieces and Machine Tools
LED flashes to indicate that battery life is low Plunge Milling
All Supported LE All
Ramping All Supported LED All
LIVE
Plunge Milling
Shoulder Milling
Shoulder Milling
Battery Alarm Buzzer Helical Milling
Battery Alarm Buzzer
Helical Milling Conductivity
Ramping
CYLINDRICAL SHANK TYPE
Notifies via buzzer All Supported LED All
Notifies via LED LIVE
All Supported LED All
LIVE
Battery Alarm Buzzer
Battery Alarm Buzzer
Conductivity
Conductivity
L 1
L
1.102
ACCESSORIES
Buzzer
Z
Over-Travel
Catalog Number PMPC-20 PMPC-32
Weight (lbs.)
ØDh7
L
L 1
Ø4
20mm 3.937 32mm 3.543
1.969 2.362
1.1 1.5
Over-Travel
STYLUS PG. 634
LED (3 locations)
• ST28-4R stylus is included
BBT SHANK TYPE
L
L 1
1.102
Buzzer
Z Over-Travel
BBT30
Ø4
Over-Travel
LED (3 Locations)
Fig. 1
R
L
SPINDLE SYSTEM DUAL CONTACT
L 1
ACCESSORIES
1.102
Catalog Number
Weight (lbs.)
Buzzer
Fig.
L
L 1
BBT40
Over-Travel
Z
Ø4
BBT30-PMPC-115 BBT40-PMPC-120
1 2
4.528 2.480 4.724 3.661
1.76 2.86
STYLUS PG. 634
Over-Travel
Fig. 2
LED (3 Locations)
• ST28-4R stylus is included
SPECIFICATIONS Repeatability
±1μm (.00004")
Over-Travel
XY ±12mm Z 5mm (XY±.472” Z.197")
Measuring pressure
XY 0.4N Z 1.5N
PMPC-20, 32
LR1 x 2P
Battery
BBT40-PMPC-120 BBT30-PMPC-115
CR2 x 1
PMPC-20, 32
280 Continuous Hours
Battery Life
BBT40-PMPC-120 BBT30-PMPC-115
260 Continuous Hours
• The specifications above are values when ST28-4R stylus is used • Repeatability is affected by stylus length • There is a delay of approx. 5μm in XY direction and 2μm in Z direction when the stylus contacts the workpiece measuring surface to illuminate the LED
630
Powered by FlippingBook