MEASURING INSTRUMENTS
C C
Plunge Milling
Plunge Milling
Shoulder Milling
Shoulder Milling
Helical Milling
Helical Milling
Ramping
Ramping
BASE MASTER MINI For Lathe or Mill
For all cutting tools, workpieces and machine tools
Notifies via LED LIVE
Conductivity All Supported LED All LIVE
All Supported LED All
• Standard height of .787" (20mm) • LED light for easy confirmation • Low measurement pressure corresponding to the blade diameter of Ø.1mm • Achieves measurement of the cutting edge position of small lathes End Milling Drilling End Milling Battery Alarm Buzzer Reaming Drilling
Battery Alarm Buzzer
Conductivity
Tool Of Sens Touch Pro & Edge Fin
Touch Probe & Edge Finder
Tapping Height Accuracy Reaming
Drilling +0.005mm 0 (+.0002" 0)
Reaming
Tapping
End Milling
Repeatability
±1μm (.00004") ø.1mm (.004")
Min. Tool Diameter Measuring Pressure
1N
LED
Stroke
2mm (.078")
Touch Signal
LED Illuminates (Green)
Battery
SR44 x 2
.453
1.319
Chamfering Back Chamfering Face Milling Battery Life
10 Continuous Hours
Back Chamfering Face Milling Back Spot Facing Tap Hole Chamfering Back Spo Facing
Tap Hole Chamfering
Back Chamfering Face Milling Chamfering
Chamfering
Chamfering
Chamfering
1.772
Weight
.15 lbs.
.303
Catalog Number BMM-20H
Battery
Ø.157
Back Chamfering
Back Chamfering
Back Chamfering
Chamfering Magnet
Chamfering
Chamfering
Chamfering
Chamferin
Chamfering
Chamfering
Ø.906
Centering Chamferin
Plunge Milling
Centering & Chamfering
Plunge Milling
Shoulder Milling
Shoulder Milling
Shoulder Milling
Helical Milling
Helical Milling
Helical Milling
Ramping
Ramping
Ramping
TOOL MASTER Non-Conductive Workpieces and Tools can Also be Measured Uses a large, easily read dial (with buzzer and LED), one-touch height adjustment mechanism and a firmly fixed powerful magnet. Battery Alarm Buzzer
For all cutting tools, workpieces and machine tools
Notifies via LED LIVE
Notifies via Buzzer All Supported LED All
Conductivity All Supported LED All LIVE
All Supported LED All
L
Battery Alarm Buzzer
Battery Alarm Buzzer
Conductivity
Con
Height Accuracy Min. Tool Diameter Measuring Pressure
100 +.02/0mm
Ø1.535 Ø1.654
Ø1mm
3N (at 100mm)
Stroke
10mm
LED (red) LED (green)
Stroke Range
97-102mm
LED
Lit (Green)
Around 100.5mm
Buzzer
"Beep"
Notification Signal
LED Flashing (Green/Red) Buzzer "Beep Beep Beep"
Buzzer
Around 99.5mm
Battery
Battery Weight
SR44 x 2
Magnet
2.2 lbs.
Standard Accessory
Setting Gage x 1P
2.157
Ø2.480
Catalog Number TM-100N
Min. Scale
.01mm ±15μm
• Dial gage accuracy conforms to JIS B7503:2011. • Model without magnets is available; if required, add /N at the end of the model number when ordering (Example: TM-100N/N)
Indicator Error Repeatability Return Error
Dial Gage Accuracy
5μm 5μm
638
Powered by FlippingBook