BIG DAISHOWA High Performance Tooling Solutions Vol 1

20,000 RPM

28,000 RPM

25,00 RPM

MAX 32,000 RPM

MAX 30,000 RPM

COLLET CHUCKS

MEGA E CHUCK CLAMPING RANGE: Ø.125"-.500" (Ø3-12mm) Exclusively for High Speed Finish End Milling

COOLANT MAX 33,000 RPM THROUGH MAX 45,000 RPM

MAX 38,00 RPM

MAX 35,000 RPM

MAX 40,000 RPM

L

L 1

H

MAX 50,000 RPM

MAX 60,000 RPM

BCV No.

MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM GR35

R

S P I N D L E S Y S T E M DUA L CON T AC T

Catalog Number

Weight (lbs.)

Ød

ØD

ØD 1

L

L 1

H

Collet

Nut

Wrench Max RPM

BCV40-MEGA6E-3 BCV40-MEGA6E-4 BCV40-MEGA6E-5 BCV40-MEGA6E-6 BCV40-MEGA8E-3 BCV40-MEGA8E-4 BCV40-MEGA8E-5 BCV40-MEGA8E-6 BCV40-MEGA10E-3 BCV40-MEGA10E-4 BCV40-MEGA10E-5 BCV40-MEGA10E-6 BCV40-MEGA10E-8 BCV40-MEGA13E-3 BCV40-MEGA13E-4 BCV40-MEGA13E-5 BCV40-MEGA13E-6 BCV40-MEGA13E-8 BCV50-MEGA13E-4 BCV50-MEGA13E-5 BCV50-MEGA13E-6 BCV50-MEGA13E-8

1.09 1.25 1.45 1.50 1.28 1.46 1.55 1.69 1.48 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.90 2.07 2.25 2.42

3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 8.00 3.00 4.00 5.00 6.00 8.00 4.00 5.00 6.00 8.00

1.50 2.42 3.54 4.54 1.50 2.54 3.58 4.58 1.54 2.58 3.58 4.58 6.62 1.62 2.62 3.62 4.62 6.62 2.42 3.42 4.42 6.50

35,000 29,000 29,000 20,000 30,000 29,000 29,000 20,000 30,000 29,000 29,000 22,000 16,000 30,000 29,000 29,000 22,000 16,000 18,000 18,000 16,000 12,000

2.5 3.0 3.4 3.8 2.8 3.2 3.6 4.3 2.9 3.4

.125-.250 (3-6mm)

.984

1.45-1.77 MEC6- o

MEN6 MGR25

.125-.250 (3-8mm)

1.181

1.65-2.00 MEC8- o

MEN8 MGR30

.125-.375 (3-10mm)

MAX 8,000 RPM MAX 4,000 RPM 3.9 4.5 5.2 3.2 3.8 4.3

1.378

1.89-2.28 MEC10- o

MEN10

MAX 2,000 RPM

.125-.500 (3-12mm)

1.654

1.96-2.36 MEC13- o

MEN13 MGR42

4.9 6.1 8.5 9.3

.125-.500 (3-12mm)

1.654

1.96-2.36 MEC13- o

MEN13 MGR42

10.6 12.8

• MEGA E NUT is included; collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw

ACCESSORIES

COLLET PG. 380

MEGA NUT PG. 381

PERFECT SEAL PG. 381

MEGA WRENCH PG. 390

SCREW PG. 411

70

Powered by