Unilock Modular Workholding System Vol. 2

TWIN PIN GRIPPER

Sold as a complete assembly, the gripper is located on the robot arm or an adapter plate with two dowel pins. Four M8 threaded holes are used to secure it in place. The coupling is also oriented on the pallet with two dowel pins. Three M10 cap screws are used to attach the couplings to fixture plates.

136

60

86

1.5

• All dimensions are in millimeters

Housing

Plunger

Ball

Air Blast

Bushing

Unclamped

Clamped

138

Powered by