Unilock Modular Workholding System Vol. 2

EDM 100/150

The EDM Specialist The EDM 100/150 chuck is designed to operate in submerged environments. Completely sealed and produced from stainless steel, this chuck can be used in Wire EDM and Water Jet machines. This chuck provides an open interface and clamping knobs can be loaded from the top or bottom side. This chuck is compatible with the entire Unilock product range as it uses the standard sized System 40 clamping knob. With a total height of 39mm (1.535"), this chuck delivers the lowest stack height in the Unilock family.

Features: • Turbo option for increased holding power • Weight: 3.35 kg (7.3 lbs) • Knob can be retained from both sides • Chuck can be mounted on any face

Recommended Bolt Sizes

Clamping Force (lbs)

Air Connection

Chuck Model

Catalog Number

Notch (Width x Qty)

Weight (lbs)

M10 M12 M16 M20† M24† Spring Only Turbo Assist

Port Size Flange

15.272.150

EDM 100/150

— — — 440-550

1,100-1,350

7.3 — REPAIR COMPONENTS 1/8

3 3

AIR FITTINGS

• No hardware included † Optional

PG. 144

PG. 149

40

Powered by