TAP HOLDERS
MEGA SYNCHRO TAPPING HOLDER TAPPING RANGE: No.0-No.6 (M1-M3)
L
L 1
Micro Collet NBC4S-
L 2
PATENT # 9446463
BBT No.
.472
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Tapping Range d* (Inch)
Tapping Range d* (Metric)
Weight (lbs.)
øD
L
L 1
L 2
Wrench
BBT30-MGT3-70 BBT40-MGT3-90
No.0-No.6 No.0-No.6
M1-M3 M1-M3
.787 .787
2.76 3.54
1.81 2.40
.87 .87
MGR12 MGR12
1.5 2.6
• Nut is included; collet and wrench must be ordered separately • When attaching or detaching the tap, a commercially available flat wrench (12mm width) is also required • Not capable of supplying coolant through the holder body
ACCESSORIES
Cannot be used with machining center without synchronized tapping function.
COLLET PG. 374
MEGA NUT PG. 376
MEGA WRENCH PG. 410
TAPPING RANGE: AU13/16-AU1-1/2 (M20-M36)
COOLANT
7.480
THROUGH
4.921
2.50
BBT50
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Tapping Range d (Inch) AU13/16-AU1-1/2 AP3/8-AP1
Tapping Range d (Metric)
Weight (lbs.)
BBT50-MGT36-125
M20-M36
15.8
• MGT set screw is included; tap holder must be ordered separately
ACCESSORIES
Cannot be used with machining center without synchronized tapping function.
SYNCHRO ADJUSTER PG. 425
TAP HOLDER PG. 424
O-RING PG. 425
SCREW PG. 425
167
Powered by FlippingBook