ANGLE HEADS
Catalog Number
Max RPM
Weight (lbs.)
ød
øE
G
K
L
L 1
L 2
M P
Q øF
Collet
HSK-A100-AG90/NBS10-325LS HSK-A100-AG90/NBS10-355LS HSK-A100-AG90/NBS10-385LS HSK-A100-AG90/NBS10-425LS HSK-A100-AG90/NBS10-455LS HSK-A100-AG90/NBS10-485LS HSK-A100-AG90/NBS10-525LS HSK-A100-AG90/NBS10-555LS HSK-A100-AG90/NBS10-585LS HSK-A100-AG90/NBS13-325LS HSK-A100-AG90/NBS13-355LS HSK-A100-AG90/NBS13-385LS HSK-A100-AG90/NBS13-425LS HSK-A100-AG90/NBS13-455LS HSK-A100-AG90/NBS13-485LS HSK-A100-AG90/NBS13-525LS HSK-A100-AG90/NBS13-555LS HSK-A100-AG90/NBS13-585LS HSK-A100-AG90/NBS20-340LS HSK-A100-AG90/NBS20-440LS HSK-A100-AG90/NBS20-540LS
12.80 13.98 15.16 16.73 17.91 19.09 20.67 21.85 23.03 12.80 13.98 15.16 16.73 17.91 19.09 20.67 21.85 23.03
2.17 7.17 3.35 8.35 4.53 9.53 2.17 11.10 3.35 12.28 4.53 13.46 2.17 15.04 3.35 16.22 4.53 17.40 2.17 7.17 3.35 8.35 6.10 9.53 2.17 11.10 3.35 12.28 6.10 13.46 2.17 15.04 3.35 16.22 6.10 17.40
40.8 41.7 42.3 50.5 51.4 52.0 60.2 61.1 61.7 41.0 41.9 42.5 50.7 51.6 52.2 60.4 61.3 61.9 43.4 53.1 62.8
.059-.394 1.181 1.181 .984
10.63
1.77 1.69 3.583
.059-.394 1.181 1.181 .984
14.57
1.77 1.69 3.583
NBC10 6,000
.059-.394 1.181 1.181 .984
18.50
1.77 1.69 3.583
.098-.512 1.378 1.220 1.102
10.63
2.05 1.77 3.976
NBC13 6,000
.098-.512 1.378 1.220 1.102
14.57
2.05 1.77 3.976
.098-.512 1.378 1.220 1.102
18.50
2.05 1.77 3.976
.098-.787 1.811 1.378 1.378 13.39 10.30 2.76 7.76 2.56 2.44 5.197 .098-.787 1.811 1.378 1.378 17.32 14.57 2.76 11.69 2.56 2.44 5.197 .098-.787 1.811 1.378 1.378 21.26 18.50 2.76 15.63 2.56 2.44 5.197
NBC20 3,000
• Nut and wrench are included; coolant pipe and collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY END MILL COLLETS cannot be used
ACCESSORIES
The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1).
COLLET PG. 378
WRENCH PG. 392
STOP BLOCK PG. 429
241
Powered by FlippingBook