MILLING CHUCKS
Catalog Number
Min Clamping Length E
Weight (lbs.)
ød
øD
øD 1
L
L 1
H
Wrench
C8-MEGA1.250DS-3.5 C8-MEGA16DS-70 C8-MEGA16DS-105 z C8-MEGA16DS-135 z C8-MEGA20DS-75 C8-MEGA20DS-135 C8-MEGA20DS-165 C8-MEGA25DS-75 C8-MEGA25DS-135 C8-MEGA25DS-165 C8-MEGA32DS-90 C8-MEGA32DS-105 C8-MEGA32DS-135 C8-MEGA32DS-165
1.250
3.150
3.386
3.59 2.85 4.23 5.41 3.05 5.41 6.59 7.97 5.41 6.59 3.64 4.23 5.41 6.59
1.65
3.62
2.80
MGR80L
9.5 6.2 7.9 9.0 7.3
16mm 1.811
2.193
.98
2.87
1.89
MGR46L
3.03
20mm 2.362
2.717
1.10
1.97
MGR60L
11.0 13.0
2.80-3.19
3.03
7.5
11.9 14.1
25mm 2.756
3.031
1.34
2.20
MGR70L
3.07-3.46
3.62 4.02 4.21
9.5
10.6 13.2 16.1
32mm 3.150
3.386
1.65
2.36
MGR80L
3.15-3.82
• Wrench must be ordered separately • Jet-through type provides coolant form the chuck nose, thus tools with oil holes cannot be used • Models marked can be used with optional axial adjusting screws • M8 hex screw is required with models marked z • Adjusting screw can only be used with models marked z or , please contact us if using for center-through applications • Models marked can only be used with straight collet model C25-
ACCESSORIES
PERFECT SEAL/ JET COLLET PG. 404
COLLET PG. 407
MEGA WRENCH PG. 410
SCREW PG. 434
281
Powered by FlippingBook