STOP BLOCKS
SEMI-FINISHED STOP BLOCK Designed for ANGLE HEAD, AIR POWER SPINDLE, HIGH SPINDLE, and Hi-JET HOLDER, this block features the correct groove form and extra material for height adjustment. If a pre-made block isn’t available, this option can be used. Consult your machine tool builder for proper selection, machining, and installation.
S=4.331 " (110mm)
2.559 2.953 3.543
1/4-20 UNC Through All (2x)
.266 x .315 Through All (2x)
2.000 1.000
.438 .250
1.772
U1/4-20 Cap Bolt
ø1/4 Pin
.394x45º TYP
1.772 3.543 1.260 1.181 1.102 .894
1.181 1.102
30º
.894
+0º -15º Gaging 10º
ø.413
ø.276
Catalog Number SB-H50
+0º -15º 10º Gaging
.787
1/8 NPT
PT1/8
Catalog Number SB-G/E
ø.268
• Adjust to the required height by milling the base • Fix the stop block by inserting two dowel pins (ø1/4)
S=2.559 " (65mm) / S=3.150 " (80mm)
Machineable Area
3.150
2.362 2.953 2.126
1.063 1.063
U5/16-18 Cap Bolt
3.937 1.575
ø1/4 Pin
.591
.591 1.181 .787 .984
.772 .709
+0º -15º 10º Gaging
+0º -15º 10º Gaging
.772
.709
1.772
.591
PT1/4
.709 .772
+0º -15º 10º Gaging
M8x1.0 .197
Catalog Number SB-H40
Catalog Number SB-X
PT1/4
• Fix the stop block by inserting two dowel pins (ø1/4) • Not height-adjustable
• For use with most Haas 40 taper machines
Catalog Number SB-F
Indicates Heat Treatment (HRC45-50), All Other Surfaces Can be Milled
430
Powered by FlippingBook