MEASURING INSTRUMENTS
TOOL MASTER Non-Conductive Workpieces and Tools can Also be Measured Uses a large, easily read dial (with buzzer and LED), one-touch height adjustment mechanism and a firmly fixed powerful magnet.
For all cutting tools, workpieces and machine tools
Notifies via LED
Notifies via Buzzer
All Supported All
LED
Buzzer
ø1.535 ø1.654
LED (red) LED (green)
Buzzer
Magnet
Catalog Number TM-100N
2.157
ø2.480
Height Accuracy Min Tool Diameter Measuring Pressure
100 +.02/0mm
ø1mm
3N (at 100mm)
Stroke
10mm
Stroke Range
92-102mm
LED
Lit (Green)
Around 100.5mm
Buzzer
"Beep"
Notification Signal
LED Flashing (Green/Red) Buzzer "Beep Beep Beep"
Around 99.5mm
Battery Weight
SR44 x 2
2.2 lbs.
Standard Accessory
Setting Gage x 1P
Min Scale
.01mm ±15μm
Indicator Error Repeatability Return Error
Dial Gage Accuracy
5μm 5μm
• Dial gage accuracy conforms to JIS B7503:2015 • Batteries not included; use batteries commercially available on the market • Model without magnets is available; if required, add /N at the end of the model number when ordering (Example: TM-100N/N)
605
Powered by FlippingBook