MEASURING INSTRUMENTS
ACCU CENTER Simple Mechanical Design for High-Precision Positioning • Just touch the stylus to the workpiece surface to complete measurement • Repeatability within 3μm (when used on vertical machines) • Hard chrome plated stylus for superior durability
Catalog Number ACCU-C10
.571 3.09
1.102
1.417
Catalog Number ACCU-C104
.315
1.417 .610
1.378
3.405
Operation Instructions
1
2
3
4
ø.394 (ø10mm) ø.157 (ø4mm)
Mount the ø10 straight part to a Milling Chuck or NEW BABY CHUCK.
Press the stylus lightly with fingers to move off center and rotate at 400-600 RPM.
Touch the stylus to the workpiece; its runout will gradually decrease and it will seem to come to a stop.
Apply finer feed and keep the stylus in contact; it will begin to slide in one direction. Where it begins to slide, compensate the position by radius of the stylus 5mm (2mm) to detect the reference position.
Not suitable for horizontal type machines.
607
Powered by FlippingBook