CLEANERS
CHIP BLOWER Air Pressure Removes Cutting Chips and Coolant • Reduce environmental impact • Improved machine utilization rate
COOLANT
• Increased productivity • Can be used with vertical and horizontal machining centers
THROUGH
High-pressure washing with center-through coolant
Blows away cutting chips with powerful air pressure
ø160 Steel Shank Type
Catalog Number
ST20S-CBL160
500 rpm (.5 sec)
1,000 rpm
2,000 rpm
Startup Spindle Speed*
(.5 sec)
(.5 sec)
Min 6,000 Max 9,000 rpm
Recommended Spindle Speed
Rotation Direction
Forward
Flange: ø2.60
Distance to the Workpiece Surface to be Cleaned (with wing opened to maximum)
3.94"-5.91"
Recommended Movement Feed
118-394 ipm
The Wing May Open During ATC When it is Used with an Ultra-High Speed ATC Machining Center
ø260 & ø330 Steel Shank Type
Catalog Number
ST20S-CBL260 ST20S-CBL330
1,000 rpm
2,000 rpm
500 rpm (.5 sec)
Startup Spindle Speed*
(.5 sec)
(.5 sec)
Min 4,000 Max 7,000 rpm
Min 3,000 Max 6,000 rpm
Recommended Spindle Speed
Rotation Direction
Forward
Flange: ø2.60
Distance to the Workpiece Surface to be Cleaned (with wing opened to maximum)
3.94"-5.91"
Recommended Movement Feed
118-394 ipm
The Wing May Open During ATC When it is Used with an Ultra-High Speed ATC Machining Center
623
Powered by FlippingBook