SPHINX DRILLS
MICRO DRILLS
HIGH PERFORMANCE DRILLS
Ø ≤ 3mm • 15+ different standard article numbers • 1,700 different standard micro drills available • Minimum diameter Ø.03mm • Standard diametrical tolerances as low as 0/-.004mm • Utilization of modern coatings designed specifically for micro tools • Ultra-fine flute surface finish Micro Tricut Drill Reamer • Ideal tool for drill reaming steels, short chipping stainless steels, titanium and cast iron • Ø3mm reinforced shank for all diameters • Three-flute geometry allows high feed rates • Excellent self-centering capabilities • Fine flute surface finish for optimal chip flow • Hole tolerances ranging from H7-H9 Deep Hole Drill • 20xd, 40xd, 60xd & 80xd for Ø.20/.40-1.50mm • Solid carbide • Ø3mm shank for all diameters • External coolant • Innovative AlCrN based coating intended specifically for micro tools
• Ø1.00-20.00mm • Lengths 3-30xd • Utilization of modern coatings suitable for most common and exotic materials • Internal coolant for most sizes • Most geometries can be reground and recoated to decrease cost per hole
Quadro Plus • 6xd & 12xd standard flute lengths • Internal coolant for all sizes and lengths • Self-centering • Two cutting edges, four guiding edges • Highest performing drill in short chipping aluminum and cast iron • Straight flute design permits highest speeds and feeds • Best achievable size control of H7-H9
Phoenix TC2 • 3xd, 6xd, 9xd, 12xd, 16xd, 20xd and 30xd standard flute lengths • Two margin modified Phoenix point geometry for optimal chip formation • Polished flutes and brushed cutting edges • Internal coolant for all sizes and lengths • AlCrTiN coated for ultimate wear resistance
Nirox • New hard coating with smooth surface for enhanced chip and coolant flow • Degressive helix angle • Point geometry designed for accurate and precise hole location • Unique margin geometry for optimum guidance • External coolant along the flutes
MICRO MILLS
ENGRAVING MILLS
End Mills • Ø.10-3.00mm
Deburring Mill – Lollipop • Ø1.00-6.00mm
Chamfering Mill – Noventa • Ø.80-6.00mm
Flat/Radius Tip • Ø.02-.15mm • Flat and radius tip • 30º, 40º, 50º, 60º & 90º standard point angles • 0º helix
• Ø3mm or Ø4mm reinforced shank for all dia. • Useful in ISO P, M, K, S, N and O materials • Standard 2-flute and 3-flute geometries
• Geometry that prevents vibrations • Perfectly ground, round head (270º) • Depth up to 4xD possible
• Depth of up to 4xD • 45º (90º included) • Access features smaller than 1mm
23
Powered by FlippingBook