UNILOCK WORKHOLDING
CLAMPING KNOBS AND BALLS
MULTI-AXIS SYSTEMS
ROUND CHUCKS
Multi-axis workholding products are designed to provide flexibility and functionality. These solutions locate and stabilize the workpieces without obstructing access to the top and sides of the part. They also allow a clamped workpiece to be flipped into new orientations for subsequent machining operations without unclamping.
The round UNILOCK chucks come in diameters from Ø90mm to Ø196mm (Ø3.543" to Ø7.716") and body styles to fit a variety of applications. Chucks can be supplied with single notches, multiple notches or bushing holes for timing. Most body forms allow the use of turbo-assisted clamping for higher retention forces.
Can be attached to fixtures or directly to workpieces. Our standard knobs can be mounted in a blind hole from the bottom or pulled up from the top.
PALLETS
Reductions
Pallets are provided fully assembled with their required quantity of UNILOCK knobs and lifting handles, and are available in either steel or aluminum.
Extensions
UNILOCK Knobs
Bases
PREASSEMBLED CHUCKS
Bases
UNILOCK Basestation
These chucks are sold mounted to a base plate. The base plate provides easy mounting of the chucks to the machine table as well as a pre-plumbed air supply. All bases provide either notches or a ground edge to square the chucks to the machine table.
AUTOMATION CHUCKS
Machine Table
Machine Table
UNILOCK automation chucks are expanding the role of air pressure beyond that of holding the chuck open during changeovers or assisting the springs in the clamping process. Automation chucks can confirm the presence of a clamping ring/fixture via air pressure monitoring. Air is also used to help clean the locating surfaces.
STABILIZER SYSTEM
Provides lateral support for tall parts during machining, welding or assembly processes. Allowing the transfer of loads down to the table or base. • Fine adjustment allows for adjusting the position of parts • Magnetic base option • Five fixed length extensions • Two adjustable length bases
Pallet Clamping Ring
Clamping Wedge Piston
UNILOCK Automation Chuck
Confirmation Port (x2)
Open Port
Base Plate
Turbo Port
26
Powered by FlippingBook