COLLET CHUCKS
H
Max RPM
Weight (lbs.)
Catalog Number
Collet
Nut
Wrench
L
L 1
Ød
ØD ØD 1
Min
Max
BBT40-MEGA10E-60 BBT40-MEGA10E-75 BBT40-MEGA10E-90 BBT40-MEGA10E-105 BBT40-MEGA10E-120 BBT40-MEGA10E-135 BBT40-MEGA10E-165 BBT40-MEGA10E-200 BBT40-MEGA13E-60 BBT40-MEGA13E-75 BBT40-MEGA13E-90 BBT40-MEGA13E-105 BBT40-MEGA13E-120 BBT40-MEGA13E-135 BBT40-MEGA13E-165 BBT40-MEGA13E-200 BBT50-MEGA6E-90 BBT50-MEGA6E-120 BBT50-MEGA6E-165 BBT50-MEGA6E-200 BBT50-MEGA8E-90 BBT50-MEGA8E-120 BBT50-MEGA8E-165 BBT50-MEGA8E-200 BBT50-MEGA10E-90 BBT50-MEGA10E-120 BBT50-MEGA10E-165 BBT50-MEGA10E-200 BBT50-MEGA13E-90 BBT50-MEGA13E-120 BBT50-MEGA13E-165 BBT50-MEGA13E-200
1.42 1.51 1.61 1.72 1.82 1.92 2.14 2.19 1.68 1.77 1.89 1.99 2.10 2.20 2.26 2.46 1.20 1.40 1.71 1.95 1.38 1.59 1.90 2.14 1.57 1.79 2.09 2.33 1.83 2.05 2.32 2.55
2.36 2.95 3.54 4.13 4.72 5.31 6.50 7.87 2.36 2.95 3.54 4.13 4.72 5.31 6.50 7.87 3.54 4.72 6.50 7.87 3.54 4.72 6.50 7.87 3.54 4.72 6.50 7.87 3.54 4.72 6.50 7.87
1.14 1.69 2.28 2.87 3.46 4.06 5.31 6.73 1.14 1.69 2.32 2.95 3.58 4.17 5.39 6.77 1.85 3.03 4.80 6.18 1.85 3.03 4.80 6.18 1.85 3.03 4.76 6.14 1.85 3.03 4.76 6.14
30,000 30,000 30,000 29,000 29,000 27,000 22,000 16,000 30,000 30,000 30,000 29,000 29,000 26,000 22,000 16,000 20,000 20,000 14,000
2.7 3.0 3.2 3.6 3.9 4.4 5.2 6.8 2.9 3.2 3.6 4.1 4.6 5.2 6.2 8.0 8.4 8.8 9.7
.125-.375 (3-10mm)
1.378
1.89
2.28 MEC10-
MEN10 MGR35
.125-.500 (3-12mm)
1.654
1.97
2.36 MEC13-
MEN13 MGR42
.125-.250 (3-6mm)
.984
1.46
1.77 MEC6-
MEN6 MGR25
9,000
10.8
20,000 20,000 16,000 11,000 20,000 20,000 16,000 13,000 18,000 18,000 16,000 12,000
5.6 9.0
.125-.250 (3-8mm)
1.181
1.65
2.01 MEC8-
MEN8 MGR30
10.1 11.4
8.8 9.2
.125-.375 (3-10mm)
1.378
1.89
2.28 MEC10-
MEN10 MGR35
10.8 12.1
8.8 9.7
.125-.500 (3-12mm)
1.654
1.97
2.36 MEC13-
MEN13 MGR42
11.4 13.2
• MEGA E NUT is included; collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw
ACCESSORIES
COLLET PG. 392
MEGA NUT PG. 393
PERFECT SEAL PG. 393
MEGA WRENCH PG. 402
SCREW PG. 423
125
Powered by FlippingBook