TAP HOLDERS
MEGA SYNCHRO TAPPING HOLDER TAPPING RANGE: No.0-No.6 (M1-M3)
L
L 1
Micro Collet NBC4S-
L 2
PATENT # 9446463
BBT No.
.472
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Tapping Range d* (Inch)
Tapping Range d* (Metric)
Weight (lbs.)
ØD
L
L 1
L 2
Wrench
No.0-No.6 No.0-No.6
M1-M3 M1-M3
BBT30-MGT3-70 BBT40-MGT3-90
.787 .787
2.76 3.54
1.81 2.40
.87 .87
MGR12 MGR12
1.5 2.6
• Nut is included; collet and wrench must be ordered separately • When attaching or detaching the tap, a commercially available flat wrench (12mm width) is also required • Not capable of supplying coolant through the holder body
Cannot be used with machining center without synchronized tapping function. ! CAUTION
ACCESSORIES
COLLET PG. 368
MEGA NUT PG. 370
MEGA WRENCH PG. 402
TAPPING RANGE: AU13/16-AU1-1/2 (M20-M36)
COOLANT
7.480
THROUGH
4.921
2.50
BBT50
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Tapping Range d (Inch) AU13/16-AU1-1/2 AP3/8-AP1
Tapping Range d (Metric)
Weight (lbs.)
M20-M36
BBT50-MGT36-125
15.8
• MGT set screw is included; tap holder must be ordered separately
Cannot be used with machining center without synchronized tapping function. ! CAUTION
ACCESSORIES
TAP HOLDER PG. 416
SYNCHRO ADJUSTER PG. 417
O-RING PG. 417
SCREW PG. 417
153
Powered by FlippingBook