ANGLE HEADS
AGU30 TYPE CLAMPING RANGE: Ø.098"-.787" For Angular Operations
L
L 2
L 1
G G
Max F 2
Ø3.819
MAX 6,000 RPM
M .197 Pin Compression Fixed Length A
Fig. 1
L
L 2 Max F 2
L 1
G G
ANGLE ADJUSTMENT BY ALIGNING DIVISIONS Spindle angle is easily adjustable from 0º to 30º using the scale indication on the body.
Ø4.921
MAX 4,000 RPM
M
.236 Collar Compression (#50 Only)
Fixed Length A .118 Pin Compression
Fig. 2
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max RPM
Weight (lbs.)
Fig.
Ød
ØE G L
L 1
L 2
M P Q F 1
F 2
Collet
.098-.512 .098-.787
BBT40-AGU30/NBS13-240 BBT50-AGU30/NBS20-295
1.378 1.142 9.45 5.32 4.12 5.79 1.34 1.18 2.07 .55 NBC13- 1.811 1.437 11.61 6.50 5.12 6.38 1.77 1.54 2.56 .67 NBC20-
6,000 15.3 4,000 35.8
1 2
• Nut and wrench are included, collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • Automatic tool change may not be available depending on machine tool models • When supplied through the stop block, coolant can be ejected from the housing
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle. ! CAUTION
ACCESSORIES
COLLET PG. 372
WRENCH PG. 384
STOP BLOCK PG. 419
STOP BLOCK PG. 419
SETTING DISC (INCLUDED) For the precise adjustment of spindle angle or direction.
Clamp the Setting Disc Into the Angled Spindle
Check the Cutter Alignment and the Setting Angle
171
Powered by FlippingBook