COLLET CHUCK
Catalog Number
Max RPM
Weight (lbs.)
H
Collet
Nut
Wrench
Ød
ØD
L
L 1
HSK-A50-MEGA6N-75 HSK-A50-MEGA6N-100 HSK-A50-MEGA6N-135 HSK-A50-MEGA6N-165 HSK-A50-MEGA8N-75 HSK-A50-MEGA8N-100 HSK-A50-MEGA8N-135 HSK-A50-MEGA8N-165 HSK-A50-MEGA10N-75 HSK-A50-MEGA10N-100 HSK-A50-MEGA10N-135 HSK-A50-MEGA10N-165 HSK-A50-MEGA13N-75 HSK-A50-MEGA13N-100 HSK-A50-MEGA13N-135 HSK-A50-MEGA13N-165 HSK-A50-MEGA16N-75 HSK-A50-MEGA16N-100 HSK-A50-MEGA16N-135 HSK-A50-MEGA16N-165 HSK-A50-MEGA20N-75 HSK-A50-MEGA20N-100 HSK-A50-MEGA20N-135 HSK-A50-MEGA20N-165 HSK-A50-MEGA25N-95
2.95 3.94 5.31 6.50 2.95 3.94 5.31 6.50 2.95 3.94 5.31 6.50 2.95 3.94 5.31 6.50 2.95 3.94 5.31 6.50 2.95 3.94 5.31 6.50 3.74
1.46 2.76 3.66 4.84 1.46 2.44 3.78 4.92 1.50 2.48 3.86 5.04 1.57 2.56 3.94 5.12 1.93 2.91 4.29 5.47 1.93 2.91 4.29 5.47 2.72
30,000 25,000 20,000 14,000 30,000 28,000 20,000 14,000 33,000 25,000 20,000 14,000 28,000 25,000 18,000 12,000 28,000 20,000 15,000 10,000 20,000 15,000 10,000
1.3 1.3 1.5 1.8 1.3 1.5 1.8 2.0 1.5 1.8 2.2 2.4 1.5 2.0 2.4 2.9 2.2 2.4 3.1 3.7 2.0 2.4 3.3 4.0 2.9
.010-.236
.787
.91-1.69
MGN6
MGR20
NBC6-
1.02-1.46
.020-.315
.984
MGN8
MGR25
NBC8-
1.02-1.77
1.81
.059-.394
1.181
MGN10
MGR30
NBC10-
1.50-1.89
1.81
1.73-2.20 1.73-2.87 1.73-2.48
.098-.512
1.378
MGN13
MGR35
NBC13-
1.89
1.89-2.17
.098-.630
1.654
MGN16
MGR42
NBC16-
1.89 -2.68
1.85
2.01-2.13
.098-.787
1.811
MGN20
MGR46
NBC20-
2.01-2.68
8,000
.610-1.000
2.326
2.56
MGN25
MGR60L
12,000
NBC25-
• MEGA NEW BABY NUT is included; coolant pipe, collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • Tool adjustment amount “H” indicates the adjustment length with an adjusting screw • Adjusting screws cannot be used with models marked • NEW BABY END MILL COLLETS cannot be used with models marked
ACCESSORIES
COLLET PG. 372
MEGA NUT PG. 378
PERFECT SEAL PG. 380
MEGA WRENCH PG. 402
SCREW PG. 423
187
Powered by FlippingBook