MILLING CHUCK
Min Clamping Length
Weight (lbs.)
Catalog Number
Fig.
Ød
ØD
L
L 1
L 2
H
Wrench
E
E 1
HSK-A125-HMC.750J-4 HSK-A125-HMC1.000J-5 HSK-A125-HMC1.250J-5 HSK-A125-HMC1.500J-5 HSK-A125-HMC2.000J-6
.750
2.36 2.44 3.15 3.90 4.13
4.09
2.15 2.27 2.59 3.31 4.94
2.95
2.64
2.28 2.64 2.83 2.87 3.50
1.97 2.20 2.36
12.1 12.3 15.0
FK58-62
1.000 1.250 1.500 2.000
2
3.95
3.63
FK80-90
5.09
2.48 FK92-100 18.0 3.50 FK110-115 20.5
—
1
6.09
4.54
ACCESSORIES
• Wrench and axial adjusting screw must be ordered separately • When using center through coolant: - Set screw with sealing compound applied (standard accessory) should be used to plug an air bleed hole - Oil hole type should be chosen when straight collet is required • “H” dimension is the Max tool shank length that can be inserted into the holder • Optional adjusting screw can be used with models marked • Straight collet model C32- can only be used with models marked • M8 hex screw is required with models marked z please contact us if using for center through applications
PERFECT SEAL/ JET COLLET PG. 395
COLLET PG. 398
WRENCH PG. 401
SCREW PG. 424
• M12 hex screw is required with models marked • Through tool coolant for HSK-A125 is Jet type delivery
NEW Hi-POWER MILLING CHUCK CLAMPING RANGE: Ø12mm
COOLANT
JET THROUGH
HMC12J
MGN13
MGN16
A slim yet highly rigid milling chuck with Ø32 outer diameter nut for reduced interference.
THROUGH
Ø1.260
Ø1.387
Ø1.654
L
1.69 (Shortest Grip Depth) 2.56 (Max Insertion Depth)
Coolant Pipe (Optional)
L 1
Manual Clamping Hole
Catalog Number
Weight (lbs.)
L
L 1
Wrench
3.54 4.72
2.08 2.75
2.4 3.1
HSK-A63-HMC12J-90 HSK-A63-HMC12J-120 z
FK31-33
• Wrench must be ordered separately • M8 hex screw is required with models marked z please contact us if using for center through applications
199
Powered by FlippingBook